| Allicdata Part #: | 1662-2519-2-ND |
| Manufacturer Part#: |
S-1313D15-N4T1U3 |
| Price: | $ 0.23 |
| Product Category: | Integrated Circuits (ICs) |
| Manufacturer: | ABLIC U.S.A. Inc. |
| Short Description: | IC REG LINEAR 1.5V 200MA SC82AB |
| More Detail: | Linear Voltage Regulator IC Positive Fixed 1 Outpu... |
| DataSheet: |  S-1313D15-N4T1U3 Datasheet/PDF |
| Quantity: | 1000 |
| 3000 +: | $ 0.21559 |
| 6000 +: | $ 0.20072 |
| 15000 +: | $ 0.19328 |
| 30000 +: | $ 0.18585 |
| Current - Output: | 200mA |
| Supplier Device Package: | SC-82AB |
| Package / Case: | SC-82A, SOT-343 |
| Mounting Type: | Surface Mount |
| Operating Temperature: | -40°C ~ 85°C (TA) |
| Protection Features: | Overcurrent, Thermal Shutdown |
| Control Features: | Enable |
| PSRR: | -- |
| Current - Supply (Max): | 1.35µA |
| Current - Quiescent (Iq): | 100nA |
| Series: | S-1313 |
| Voltage Dropout (Max): | 0.85V @ 100mA |
| Voltage - Output (Max): | -- |
| Voltage - Output (Min/Fixed): | 1.5V |
| Voltage - Input (Max): | 5.5V |
| Number of Regulators: | 1 |
| Output Type: | Fixed |
| Output Configuration: | Positive |
| Part Status: | Active |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
S-1313D15-N4T1U3 is a voltage regulator that belongs to the Linear PMIC family. It\'s a device designed to maintain the voltage level at the output of an electrical circuit at the desired setpoint. The desired output voltage is typically determined by the user, to match the input voltage. It achieves voltage regulation by varying the resistance of the regulator at its output in order to reduce the current demand.
It is important to note that the primary advantage of using a linear regulator is its simplicity, low cost and no noise generation. Essentially, the S-1313D15-N4T1U3 is a three-terminal device, combining a resistor and a FET (Field Effect Transistor), located between the input and output terminals, along with a feedback pin used to adjust the output voltage.
When the input voltage is higher than the desire output voltage, the FET is turned on, reducing the voltage at its output. Conversely, when the input voltage is lower than the desired output voltage, the FET is turned off and the resistor is activated, allowing current to flow from the input pin to the output pin, thus increasing the voltage at the output. When the output voltage equals to the desired voltage, the FET is turned off and the output voltage is maintained at a steady level.
The S-1313D15-N4T1U3 is designed to be used in various applications including, but not limited to, embedded systems, power supplies, battery-powered systems, power management, automotive systems and industrial control. It is ideal for applications requiring a low quiescent current, high power efficiency, tight output voltage regulation and accurate current limit protection.
In conclusion, the S-1313D15-N4T1U3 linear voltage regulator is a high-performance integrated circuit designed for use in a variety of electrical systems. It ensures precise output voltage regulation and high power efficiency, and also offers a low quiescent current and high current limiting accuracy. Therefore, it is an ideal device for designers looking for a cost-effective and reliable voltage regulator.
The specific data is subject to PDF, and the above content is for reference
Linear Regulator/LDO Regulator IC 1 Outp...
Linear Regulator IC Positive Fixed 1 Out...
Linear Regulator IC Positive Fixed 1 Out...
Linear Regulator IC Positive Fixed 1 Out...
Charge Pump Switching Regulators, Switch...
Linear Regulator IC Positive Fixed 1 Out...