S-1315A19-A6T2U3

Current - Output:	200mA
Supplier Device Package:	HSNT-6-B
Package / Case:	6-SMD, Flat Lead Exposed Pad
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C (TA)
Protection Features:	Over Current
Control Features:	Enable
PSRR:	60dB (1kHz)
Current - Supply (Max):	13µA
Current - Quiescent (Iq):	1µA
Series:	S-1315
Voltage Dropout (Max):	0.486V @ 200mA
Voltage - Output (Max):	--
Voltage - Output (Min/Fixed):	1.9V
Voltage - Input (Max):	5.5V
Number of Regulators:	1
Output Type:	Fixed
Output Configuration:	Positive
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to S-1315A19-A6T2U3 PMIC - Voltage Regulators - Linear

The S-1315A19-A6T2U3 PMIC - Voltage Regulators - Linear is a linear voltage regulator IC (Integrated Circuit) designed to provide a stable source of power with high current, low-noise power regulation for a wide range of applications. Its linear regulator design allows for efficient power conversion from an unregulated input to a stable regulated output voltage.

S-1315A19-A6T2U3 Application Field

The S-1315A19-A6T2U3 is well-suited for use in many different applications, ranging from a variety of communication/telecommunication systems to automotive, industrial, and healthcare applications. For example, the S-1315A19-A6T2U3 can be used in telecommunications systems to provide an efficient power source for base stations and cellular towers. In an automotive application, it can be used to provide power to remote electronics systems and accessories, such as navigation systems, rearview cameras, and entertainment systems. Industrial applications such as factory automation and control use the S-1315A19-A6T2U3 in order to provide a stable power source for motors, sensors, controllers, and actuators. Furthermore, it can be integrated into medical systems to provide a stable power source for many connected electronic components.

Working Principle

The S-1315A19-A6T2U3 operates by taking an unregulated input voltage, and using a series of linear circuitry to convert it to a stable, pre-determined output voltage. This conversion is achieved through a combination of feedback loop circuitry and series of step-down components. The feedback loop circuitry is responsible for monitoring the output voltage and adjusting the power distribution accordingly. Adjustments are made using a comparison between the desired output voltage and the monitored voltage. If the monitored output does not match the desired output, the circuitry will adjust the power distribution accordingly, creating a stable output voltage.The series of step-down components, such as diodes, resistors, and transistors, work together to further refine the output voltage by gradually reducing the input voltage until it matches the desired output. This is done by limiting, or "stepping-down", the incoming voltage, so that the output voltage is both safe due to limited current, and accurate and consistent due to independent power rationing.

Pros and Cons

One of the key benefits of the S-1315A19-A6T2U3 is its high current efficiency, meaning that large amounts of power can be generated with minimal losses. Additionally, the device is capable of producing a wide dynamic range of output voltages, allowing for more flexible configurations. In addition, it has a low-noise design, meaning that the output voltage is not subject to the fluctuations of other devices or components.A potential disadvantage of the S-1315A19-A6T2U3 is that it requires a minimum voltage input in order to operate. If the input voltage is below the minimum voltage level, the device may not function correctly or may produce an inaccurate output voltage.

Conclusion

The S-1315A19-A6T2U3 is a linear voltage regulator IC designed for a variety of applications, including telecommunications, automotive, industrial, and healthcare. It is capable of efficiently converting an unregulated input voltage to a stable regulated output voltage using a combination of feedback loop circuitry and step-down components, allowing for a high current, low-noise power regulation solution. Its wide dynamic range, efficiency, and low-noise design make it a powerful and reliable choice for many applications, but it does require a minimum input voltage to operate properly.

The specific data is subject to PDF, and the above content is for reference