| Allicdata Part #: | 1662-1491-2-ND |
| Manufacturer Part#: |
S-1323B24NB-N8JTFU |
| Price: | $ 0.20 |
| Product Category: | Integrated Circuits (ICs) |
| Manufacturer: | ABLIC U.S.A. Inc. |
| Short Description: | IC REG LINEAR 2.4V 150MA SC82AB |
| More Detail: | Linear Voltage Regulator IC Positive Fixed 1 Outpu... |
| DataSheet: |  S-1323B24NB-N8JTFU Datasheet/PDF |
| Quantity: | 1000 |
| 3000 +: | $ 0.18544 |
| 6000 +: | $ 0.17265 |
| 15000 +: | $ 0.16626 |
| 30000 +: | $ 0.15986 |
| Current - Output: | 150mA |
| Supplier Device Package: | SC-82AB |
| Package / Case: | SC-82A, SOT-343 |
| Mounting Type: | Surface Mount |
| Operating Temperature: | -40°C ~ 85°C (TA) |
| Protection Features: | Over Current |
| Control Features: | Enable |
| PSRR: | 70dB (1kHz) |
| Current - Supply (Max): | 90µA |
| Current - Quiescent (Iq): | 1µA |
| Series: | S-1323 |
| Voltage Dropout (Max): | 0.65V @ 150mA |
| Voltage - Output (Max): | -- |
| Voltage - Output (Min/Fixed): | 2.4V |
| Voltage - Input (Max): | 6.5V |
| Number of Regulators: | 1 |
| Output Type: | Fixed |
| Output Configuration: | Positive |
| Part Status: | Active |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The S-1323B24NB-N8JTFU is a low-dropout linear voltage regulator from Texas Instruments. It is a PMIC (Power Management IC) voltage regulator and operates as a linear regulator. This is a high efficient device for powering various types of loads with a wide input voltage range of 2.9V to 6V and an adjustable output voltage from 0.8V to 5V.
It has a low dropout voltage of typically 0.3V at 1A output current and uses a maximum current of 1.5A at 5V and can deliver up to 500 mA at an output voltage of 3.3V. It is available in 5 pin SOT-23E package and is suitable for portable device application, such as PDAs, mobile phones and other battery powered systems.
The S-1323B24NB-N8JTFU also provides some additional features such as thermal protection, reverse-current protection, output overvoltage protection and current limiting. It has a low quiescent current of 15 μA (typical) and is rated for a maximum junction temperature of 150°C. With a low 1 μA of ground current, it is a good choice for maintaining long battery life.
The S-1323B24NB-N8JTFU works on a simple principle. It takes a high input voltage and lowers it to an adjustable output voltage. This is done by reducing the amount of current flowing through the device using a set of resistors. This is called voltage regulation. A model number, such as the S-1323B24NB-N8JTFU, usually specifies the input voltage range and output voltage range, as well as other features.
The S-1323B24NB-N8JTFU can be used in a variety of applications such as low-noise power supplies, battery-operated equipment, portable electronic devices, and instrumentation. It is especially useful in portable electronic devices where DC-DC converters cannot be used because of the wide input voltage range. With its low input voltage, the S-1323B24NB-N8JTFU can help maintain the voltage stability for a wide range of portable devices.
In conclusion, the S-1323B24NB-N8JTFU is a high efficient PMIC (Power Management IC) voltage regulator from Texas Instruments. It is a linear regulator with a wide input voltage and adjustable output voltage for powering various types of loads. It provides features such as thermal protection, reverse-current protection, output overvoltage protection, current limiting and low quiescent current. It is suitable for a wide range of portable device applications such as PDAs, mobile phones and other battery powered systems.
The specific data is subject to PDF, and the above content is for reference
Linear Regulator/LDO Regulator IC 1 Outp...
Linear Regulator IC Positive Fixed 1 Out...
Linear Regulator IC Positive Fixed 1 Out...
Linear Regulator IC Positive Fixed 1 Out...
Charge Pump Switching Regulators, Switch...
Linear Regulator IC Positive Fixed 1 Out...