S-1333D10-A4T1U3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Voltage regulators are one of the essential components of power management integrated circuits (PMICs). They ensure a steady supply of power to circuits, while protecting against over-voltage, under-voltage, and imposed load conditions. Variable linear voltage regulators are a type of voltage regulator which adjusts the voltage output based on a control signal. The S-1333D10-A4T1U3 is an example of a linear voltage regulator, and this article will look at the application field and working principle of the S-1333D10-A4T1U3 and how it works when implemented in a circuit.

The S-1333D10-A4T1U3 is a three-terminal, adjustable, linear voltage regulator with a maximum output current of 10mA. It has an output voltage range from 1.24V to 15V and an operating temperature range from -40°C to 85°C. It offers protection against extended output leading and under-voltage conditions. The S-1333D10-A4T1U3 features low dropout voltage and quiescent current, making it well-suited for a wide range of portable applications. It is also an ideal choice for use in applications where a very low output voltage is required.

The S-1333D10-A4T1U3 is an ideal voltage regulator for low-power applications as it has an active low-shutdown option, allowing the device to be completely switched off when not in use. This feature makes it well-suited for battery-powered or portable applications, where power consumption is a priority. The device also offers protection against reverse-battery, thermal, and transient conditions.

The working principle of the S-1333D10-A4T1U3 can be seen in its connection diagram. The device is connected to the positive and negative power source through its input pins & output tenninals. An external resistor is connected between the output and the adjust pin, and is used to control the output voltage. The feedback voltage is compared to an internal voltage reference, and the output is adjusted to achieve the required output voltage.

When the voltage on the output exceeds the preset voltage, the output is adjusted to bring it back within the set voltage range. If the output voltage falls below the required level, the device will increase the output voltage. In both cases, the output current is kept constant by adjusting the gain of the device. This ensures that the output voltage is maintained within a desired range.

In the case of battery-powered or portable applications, the low-shutdown feature of the S-1333D10-A4T1U3 can be used to reduce the power consumption. If the output voltage drops below the preset level, the device will automatically shut down and enter sleep mode. In this mode, current consumption is reduced significantly and the device can be quickly restarted when needed.

The S-1333D10-A4T1U3 is an ideal choice for low-power and portable applications, as it offers a wide operating range and low dropout voltage. Its low-shutdown feature makes it well-suited for applications where power-consumption is a key concern. The device is also easy to implement due to its simple connection diagram and adjustable output voltage. As a result, the S-1333D10-A4T1U3 is suitable for a wide range of applications, from consumer electronics to automotive electronics.

The specific data is subject to PDF, and the above content is for reference