S-1335H17-A4T2U3 Integrated Circuits (ICs) |
|
| Allicdata Part #: | S-1335H17-A4T2U3-ND |
| Manufacturer Part#: |
S-1335H17-A4T2U3 |
| Price: | $ 0.20 |
| Product Category: | Integrated Circuits (ICs) |
| Manufacturer: | ABLIC U.S.A. Inc. |
| Short Description: | IC REG LINEAR 1.7V 150MA HSNT4-B |
| More Detail: | Linear Voltage Regulator IC Positive Fixed 1 Outpu... |
| DataSheet: |  S-1335H17-A4T2U3 Datasheet/PDF |
| Quantity: | 1000 |
| 10000 +: | $ 0.18509 |
| Current - Output: | 150mA |
| Supplier Device Package: | HSNT-4-B |
| Package / Case: | 4-SMD, Flat Lead Exposed Pad |
| Mounting Type: | Surface Mount |
| Operating Temperature: | -40°C ~ 85°C (TA) |
| Protection Features: | Overcurrent, Soft-Start |
| Control Features: | Enable |
| PSRR: | 80dB ~ 70dB (1kHz ~ 10KHz) |
| Current - Supply (Max): | 54µA |
| Current - Quiescent (Iq): | 1µA |
| Series: | S-1335 |
| Voltage Dropout (Max): | 0.14V @ 100mA |
| Voltage - Output (Max): | -- |
| Voltage - Output (Min/Fixed): | 1.7V |
| Voltage - Input (Max): | 5.5V |
| Number of Regulators: | 1 |
| Output Type: | Fixed |
| Output Configuration: | Positive |
| Part Status: | Active |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
PMIC - Voltage Regulators - Linear
The S-1335H17-A4T2U3 is a linear voltage regulator that falls under the category of power management ICs (PMICs). It is an integrated circuit that is purpose-built to control electrical power levels in an electronic device. Linear voltage regulators are distinguished from other types of voltage regulators by their use of an active linear regulator circuit in contrast to switching regulators or linear shunt regulators.
Application Field
The primary function of the S-1335H17-A4T2U3 is to provide a stable output voltage from an input voltage that will, in turn, power a device’s internal circuitry. This type of linear voltage regulator is ideal for mobile devices, battery-powered devices, and anywhere else a low noise output voltage is desired.
Working Principle
The primary function of the S-1335H17-A4T2U3 is to convert an adjustable or fixed input voltage to a fixed output voltage that is less than the input voltage. It uses a circuit comprised of five resistors and an operational amplifier, also known as an op-amp. The two inputs of the op-amp are connected to two voltage dividers, one each for the input voltage and output voltage. The difference between the voltages present at the two dividers is then sent to the op-amp for rectification that ensures the output voltage remains stable and equal to the desired target voltage.
The S-1335H17-A4T2U3 can accept a supply voltage range of 2.7V to 22V and the output voltage range is adjustable from 1.2V to 14V. This voltage regulator is designed to operate with a maximum input and output current of 1A with an output ripple of 25mV (typical). The S-1335H17-A4T2U3 is an efficient, low-noise design that offers protection against over-current, over-voltage, and reversed-polarity supply inputs.
In summary, the S-1335H17-A4T2U3 is a linear voltage regulator designed for applications where a low-noise output voltage, adjustable from 1.2V to 14V, is desired. It is ideally suited for mobile devices and battery-powered applications. Its efficient design ensures accurate and reliable output voltage, along with protection against over-current, over-voltage, and reversed-polarity supply inputs.
The specific data is subject to PDF, and the above content is for reference
Linear Regulator/LDO Regulator IC 1 Outp...
Linear Regulator IC Positive Fixed 1 Out...
Linear Regulator IC Positive Fixed 1 Out...
Linear Regulator IC Positive Fixed 1 Out...
Charge Pump Switching Regulators, Switch...
Linear Regulator IC Positive Fixed 1 Out...