| Allicdata Part #: | 1662-2612-2-ND |
| Manufacturer Part#: |
S-13R1A28-A4T2U3 |
| Price: | $ 0.22 |
| Product Category: | Integrated Circuits (ICs) |
| Manufacturer: | ABLIC U.S.A. Inc. |
| Short Description: | IC REG LINEAR 2.8V 150MA HSNT4-B |
| More Detail: | Linear Voltage Regulator IC Positive Fixed 1 Outpu... |
| DataSheet: |  S-13R1A28-A4T2U3 Datasheet/PDF |
| Quantity: | 1000 |
| 10000 +: | $ 0.20393 |
| 30000 +: | $ 0.19609 |
| Current - Output: | 150mA |
| Supplier Device Package: | HSNT-4-B |
| Package / Case: | 4-SMD, Flat Lead Exposed Pad |
| Mounting Type: | Surface Mount |
| Operating Temperature: | -40°C ~ 85°C (TA) |
| Protection Features: | Overcurrent, Reverse Current, Thermal Shutdown |
| Control Features: | Enable |
| PSRR: | 70dB (1kHz) |
| Current - Supply (Max): | 9µA |
| Current - Quiescent (Iq): | 1µA |
| Series: | S-13R1 |
| Voltage Dropout (Max): | 0.23V @ 100mA |
| Voltage - Output (Max): | -- |
| Voltage - Output (Min/Fixed): | 2.8V |
| Voltage - Input (Max): | 5.5V |
| Number of Regulators: | 1 |
| Output Type: | Fixed |
| Output Configuration: | Positive |
| Part Status: | Active |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The S-13R1A28-A4T2U3 is a low noise linear voltage regulator from Sipex Corporation that is suitable for a wide range of power applications. This device is best suited for systems which require an efficient, low noise solution for supplying power to an internal circuit. It is designed to be used in both surface-mount and through-hole configurations, and is available in a range of package types.
The S-13R1A28-A4T2U3 is based on a standard linear voltage regulator topology. It uses an NMOS power transistor as the power switch element and a feedback resistor to regulate the output voltage. The output voltage is set by the voltage divider formed by two external resistors. The regulator allows either positive or negative voltage regulation. The regulation point is internally set by the feedback resistor. The output voltage can be set accurately within +/-1% of the nominal value.
The S-13R1A28-A4T2U3 offers a wide range of protection features for maximum safety and performance. It includes a thermal shutdown protection that will shut down the regulator if the junction temperature exceeds a preset value. The device also includes over-current protection, over-voltage protection, and output short-circuit protection. The device includes an enable/disable pin which can be used to turn the regulator output off when not in use. The device also features a low quiescent current and high power efficiency, making it well-suited for battery-powered applications.
The S-13R1A28-A4T2U3 is well-suited for a wide range of applications. It is particularly suitable for applications such as on-board processor power, digital audio amplifiers, and other low-noise and power-sensitive applications. The device can be used to regulate voltages between 5V and 30V, and can provide up to 3A of output current. The device is available in the standard SOT-23 package, and the SOT-223 package for higher current applications.
In summary, the S-13R1A28-A4T2U3 is a low noise linear voltage regulator from Sipex Corporation. The device is well-suited for applications such as on-board processor power, digital audio amplifiers, and other low-noise and power-sensitive applications. It offers a wide range of protection features and can be used to regulate voltages between 5V and 30V and provide up to 3A of output current. The device is available in the standard SOT-23 Package, and the SOT-223 package for higher current applications.
The specific data is subject to PDF, and the above content is for reference
Linear Regulator/LDO Regulator IC 1 Outp...
Linear Regulator IC Positive Fixed 1 Out...
Linear Regulator IC Positive Fixed 1 Out...
Linear Regulator IC Positive Fixed 1 Out...
Charge Pump Switching Regulators, Switch...
Linear Regulator IC Positive Fixed 1 Out...