S-13R1E22-A4T2U3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The S-13R1E22-A4T2U3 is a three-terminal linear voltage regulator, which is able to provide stable outputs of up to 3.3 volts. It is designed to replace discrete linear regulators in a wide variety of devices, and to operate over a wide range of input voltages and temperatures. The S-13R1E22-A4T2U3 is a low dropout regulator, or LDO, meaning that it can provide a stable output with a very low voltage difference between input and output.

This type of voltage regulator is a helpful component in various modern products. It can be used to create a precise, stable, and low-noise power supply for on-board microcontrollers and DSPs. LDOs are also useful for powering audio amplifiers, for powering radiofrequency (RF) circuits, and for driving high current or high voltage loads. LDOs may also be used in battery-powered devices, since they are able to supply a precise current while consuming minimal power.

The S-13R1E22-A4T2U3 is a high-performance device, with a low current consumption and a high output current (2.2A). This type of voltage regulator typically has three analog inputs, which are connected to a transistor and a reference voltage source. The transistor is then connected between the two output terminals. The LDO then works by controlling the gate pin current for the main transistor, thereby controlling the output voltage.

For the S-13R1E22-A4T2U3, the output current is regulated through pulse width modulation (PWM) and entering the desired reference voltage. The reference voltage is set through either an external voltage divider, or a resistor/capacitor (RC) network. It is always important to use the comparison pin to ensure that the output voltage is precisely set.

The S-13R1E22-A4T2U3 is also equipped with over-voltage protection, which helps protect the connected circuitry in the event of an over-voltage occurrence. This protection feature can be disabled in order to decrease the operating current, though this is generally not recommended in practical applications.

In terms of thermal performance, the S-13R1E22-A4T2U3 is also designed for effective heat dissipation. This is accomplished through a large surface area, which helps to dissipate heat and reduce the risk of device overheating. Additionally, the design uses over-voltage protection to protect the regulator from thermal overload.

Overall, the S-13R1E22-A4T2U3 is a three-terminal linear voltage regulator designed for a wide range of applications. It is capable of providing stable 3.3V outputs, while consuming a very low current and offering thermal protection. The device is able to do this by using pulse width modulation, an external voltage divider, and by dissipating heat effectively.

The specific data is subject to PDF, and the above content is for reference