S-13R1F16-M5T1U3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear voltage regulators are common components used in circuit designs to control the voltage that is supplied to other components in the system. They are used to maintain a constant output voltage for a given input voltage, despite the possible variations in the load on the circuit.The S-13R1F16-M5T1U3 linear voltage regulator is a low-dropout (LDO) regulator device. It is a 3-terminal device that takes in an input voltage, regulates it down to a lower output voltage, and specifically provides a regulated current output. This output is regulated by applying an external control voltage to the control pin.The S-13R1F16-M5T1U3 has an input voltage range of 4.5V to 25V, and provides a precision output voltage of 1.2V to 5.5V. It has an operating temperature range of -40 to 125°C and can operate at a maximum power of 16W. The device also has a dropout voltage of less than 0.5V at full rated load, a regulator delay of 1.5ms, and a maximum oscillations frequency of 250kHz.One of the key advantages of the S-13R1F16-M5T1U3 is that it has a low quiescent current with a low operating temperature, which is ideal for high-efficiency applications. Moreover, it is protected from over-current, over-voltage, and over-temperature using a built-in current limiting circuit and over-temp protection circuit.The S-13R1F16-M5T1U3 is mainly used in applications that require an extended operating range, low power dissipation, and good load and line transient responses. It is particularly suitable for automotive, networking and communications, industrial, computer, and consumer applications. Some of the most typical applications for this device are in battery-powered systems, portable devices, automotive systems, and voltage regulators requiring tight regulation and low output noise.The working principle of the S-13R1F16-M5T1U3 is relatively simple. It takes in the input voltage and regulates the output voltage in order to maintain a constant output voltage despite fluctuations in the input voltage. When the output voltage deviates from the programmed set point, the device responds by reducing the voltage to balance it out.In conclusion, the S-13R1F16-M5T1U3 is a widely used linear voltage regulator device with an advanced architecture and many beneficial features. It is widely used in automotive, networking and communications, industrial, computer, and consumer applications, and operates using a simple yet effective principle. The device can accurately control the output voltage and provide a stable output, making it ideal for high-efficiency applications where power dissipation and temperature play important roles.

The specific data is subject to PDF, and the above content is for reference