Allicdata Part #: | S-80125CNPF-JKKTFG-ND |
Manufacturer Part#: |
S-80125CNPF-JKKTFG |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ABLIC U.S.A. Inc. |
Short Description: | IC VOLT DETECTOR 2.5V SNT-4A |
More Detail: | Supervisor Open Drain or Open Collector 1 Channel ... |
DataSheet: | S-80125CNPF-JKKTFG Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | S-801 |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Type: | Voltage Detector |
Number of Voltages Monitored: | 1 |
Output: | Open Drain or Open Collector |
Reset: | Active Low |
Reset Timeout: | 130 ms Minimum |
Voltage - Threshold: | 2.5V |
Operating Temperature: | -40°C ~ 85°C (TA) |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, Flat Leads |
Supplier Device Package: | SNT-4A |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The S-80125CNPF-JKKTFG PMIC (Power Management Integrated Circuit) - Supervisors is an essential component for any electrical device, providing a wide range of functions, from maintaining a steady supply of power to managing operating temperature levels. Used in applications from automotive systems to medical devices, the S-80125CNPF-JKKTFG PMIC - Supervisors helps to protect the device from hazardous conditions and improve overall performance.
The S-80125CNPF-JKKTFG PMIC Supervisor offer a variety of features and capabilities, which can be tailored to the specific needs of an application. It is a power system monitoring, protection, and control circuit, designed to protect against voltage and current surge, temperature variations, over-voltage and over-current conditions, and other anomalies. The device also acts as an interface between the power and the system microcontroller, providing information to the microcontroller such as current input, output voltage, temperature, and other conditions.
The S-80125CNPF-JKKTFG PMIC - Supervisors are designed to function in two different modes: Off-mode, where the device operates at low power; and On-mode, where full power is supplied. In Off-mode, the device is inactive and does not provide any current to the system. When a power event such as a low voltage input or an over-voltage condition is detected, the device turns on, providing a regulated voltage output to the system. This regulated voltage output is then used to power the other components of the system.
The main components of the S-80125CNPF-JKKTFG PMIC - Supervisor include an adjustable-voltage regulator, a power-on reset (POR) circuit, a dual-channel watchdog timer, a thermal diode-temperature monitoring circuit, a power transistor output driver, and a flash memory IC. The adjustable voltage regulator is used to control the output voltage of the device, while the POR circuit allows the device to restart the microcontroller in the event of a power-down situation. The dual-channel watchdog timer helps to monitor system performance and reset the system when necessary. The thermal diode temperature monitoring circuit helps to detect whether the system temperature is safe and will shut off the device if it detects an unsafe temperature. Finally, the power transistor output driver controls the output voltage and current for the system, and the flash memory IC stores the system configuration.
The S-80125CNPF-JKKTFG PMIC - Supervisor is used in a variety of applications such as automotive, medical, industrial and consumer electronics. In automotive applications, the device is used for fuel and stop management, vehicle speed signal analysis, intelligent power management, and remote control. In the medical and healthcare industry, the S-80125CNPF-JKKTFG PMIC - Supervisors are used in patient monitoring systems and medical implants. In industrial applications, the device is used in process controlling, safety monitoring, and power distribution units. Finally, in consumer electronics, the device is used to monitor, protect and control operating temperature and power supply levels.
The S-80125CNPF-JKKTFG PMIC - Supervisors offer the user a variety of advantages, such as improved reliability and performance, reduced system costs, and improved power and temperature management. The device is designed to meet a wide range of industry standards for safety and reliability, making it a great choice for a variety of applications. With its robust feature set and wide range of applications, the S-80125CNPF-JKKTFG PMIC - Supervisors are an essential component for any modern electrical device.
The specific data is subject to PDF, and the above content is for reference
IC BATTERY BACKUPSupervisor Channel
VOLTAGE DETECTORSupervisor Open Drain or...
IC VOLT DETECTOR TO-92-3Supervisor Open ...
IC VOLT DETECTOR TO-92-3Supervisor Push-...
IC SUPERVISOR MPU 4.65V WD 8SOICSupervis...
IC SUPERVISOR 2.9V 4-USPSupervisor Open ...