Allicdata Part #: | S-80127BLPF-JEMTFU-ND |
Manufacturer Part#: |
S-80127BLPF-JEMTFU |
Price: | $ 0.20 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ABLIC U.S.A. Inc. |
Short Description: | IC VOLT DETECTOR 2.7V SNT-4A |
More Detail: | Supervisor Push-Pull, Totem Pole 1 Channel SNT-4A |
DataSheet: | S-80127BLPF-JEMTFU Datasheet/PDF |
Quantity: | 1000 |
5000 +: | $ 0.17350 |
Operating Temperature: | -40°C ~ 85°C (TA) |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, Flat Leads |
Supplier Device Package: | SNT-4A |
Series: | S-801 |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | Voltage Detector |
Number of Voltages Monitored: | 1 |
Output: | Push-Pull, Totem Pole |
Reset: | Active Low |
Reset Timeout: | 65 ms Minimum |
Voltage - Threshold: | 2.7V |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The S-80127BLPF-JEMTFU is a member of the PMIC - Supervisors family, which is a power management integrated circuit (PMIC) that can manage the power supply system of a circuit. This PMIC includes two main functions: a supervisor circuit that monitors supply power and a power transistor group, which are capable of controlling the switching function.
The supervisor circuit of the S-80127BLPF-JEMTFU is used to monitor the power supply system of the circuit. It is equipped with a voltage detection circuit and an overvoltage detection circuit, which are responsible for detecting the voltage level of the power supply system. If the voltage level is higher than the detection level, then the supervisor will initiate a circuit reset process. Additionally, the S-80127BLPF-JEMTFU is able to monitor other electrical signals, such as the system state and conditions of the attached external circuits.
The power transistor group of the S-80127BLPF-JEMTFU is composed of several MOS transistors. These transistors can control the switching function of the circuit, allowing it to switch between different voltages. It also contains a transistor driver, which is responsible for controlling the state of the power transistor group in order to register the switching instruction. The S-80127BLPF-JEMTFU is capable of providing a load power up to a maximum of 8 volts.
The S-80127BLPF-JEMTFU is widely used in automotive applications, such as car battery management and other automobile safety systems. It is also used in industrial applications as a motor controller, triggering a switch to power off motors in case of overvoltage and protecting against other electrical hazards. The S-80127BLPF-JEMTFU is suitable for use in power supply systems for various industrial and consumer electronic circuits, where a safe and stable power management system is desired.
In conclusion, the S-80127BLPF-JEMTFU is a PMIC - Supervisors device that is equipped with a supervisor circuit and a power transistor group. The supervisor circuit is responsible for monitoring the power supply system and the power transistor group is able to control the switching function. The S-80127BLPF-JEMTFU is suitable for use in automotive, industrial and consumer electronic circuits, where a safe and stable power management system is desired.
The specific data is subject to PDF, and the above content is for reference
IC BATTERY BACKUPSupervisor Channel
VOLTAGE DETECTORSupervisor Open Drain or...
IC VOLT DETECTOR TO-92-3Supervisor Open ...
IC VOLT DETECTOR TO-92-3Supervisor Push-...
IC SUPERVISOR MPU 4.65V WD 8SOICSupervis...
IC SUPERVISOR 2.9V 4-USPSupervisor Open ...