S-80131CLPF-JIQTFG Integrated Circuits (ICs)

Series:	S-801
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Type:	Voltage Detector
Number of Voltages Monitored:	1
Output:	Push-Pull, Totem Pole
Reset:	Active Low
Reset Timeout:	130 ms Minimum
Voltage - Threshold:	3.1V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	4-SMD, Flat Leads
Supplier Device Package:	SNT-4A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:
S-80131CLPF-JIQTFG is a type of power management integrated circuit (PMIC) Supervisors that is used for the protection of electrical circuits from over-current and over-voltage-related issues. This type of IC works on two levels: monitoring the voltage at the input and providing a comparator output signal to indicate when the monitored voltage is outside a preset range. This IC can also be used to trigger an alarm when the power or voltage drops below a certain threshold.Applications:
S-80131CLPF-JIQTFG is used in a wide range of applications, including in car engines, in medical equipment, and in other industrial applications. In car engines, it is used as an over-voltage protection device that can be set to limit the current passing through vulnerable components. In medical equipment, it is used as a threshold device to indicate when the power or voltage drops below a specified value, which can be set to a low threshold to prevent the operation of faulty equipment.In industrial applications, S-80131CLPF-JIQTFG is often used as a supervisor to protect expensive components from damage due to an over-voltage or an over-current event. The device can be used to detect an over-voltage or to limit the current flowing through the circuit.Working Principle:
The working principle of S-80131CLPF-JIQTFG is based on the use of a comparator circuit to compare the input voltage with a reference voltage. If the monitored voltage is above the reference voltage, the comparator circuit will indicate an over-voltage event and trigger an alarm. Similarly, if the monitored voltage is below the reference voltage, the comparator circuit will indicate an under-voltage event and trigger an alarm.The device also includes an over-voltage protection (OVP) circuit which can be set to limit the maximum current passing through the circuit. This helps to protect components from damage due to an over-voltage event.In addition, the S-80131CLPF-JIQTFG also includes an over-current protection (OCP) circuit which can be set to limit the maximum current passing through the circuit. This helps to protect components from damage due to an over-current event.Conclusion:
The S-80131CLPF-JIQTFG is a type of PMIC Supervisors that is used to protect electrical circuits from over-current and over-voltage-related issues. It works on two levels: monitoring the voltage at the input and providing a comparator output signal to indicate when the monitored voltage is outside a preset range. The device also includes an OVP and OCP circuit to limit the current passing through the circuit in cases of over-voltage or over-current. It is used in a wide range of applications, including in car engines, medical equipment, and other industrial applications.

The specific data is subject to PDF, and the above content is for reference