S-80151BLPF-JFCTFU Allicdata Electronics
Allicdata Part #:

S-80151BLPF-JFCTFU-ND

Manufacturer Part#:

S-80151BLPF-JFCTFU

Price: $ 0.20
Product Category:

Integrated Circuits (ICs)

Manufacturer: ABLIC U.S.A. Inc.
Short Description: IC VOLT DETECTOR 5.1V SNT-4A
More Detail: Supervisor Push-Pull, Totem Pole 1 Channel SNT-4A
DataSheet: S-80151BLPF-JFCTFU datasheetS-80151BLPF-JFCTFU Datasheet/PDF
Quantity: 1000
5000 +: $ 0.17350
Stock 1000Can Ship Immediately
$ 0.2
Specifications
Series: S-801
Packaging: Tape & Reel (TR) 
Part Status: Active
Type: Voltage Detector
Number of Voltages Monitored: 1
Output: Push-Pull, Totem Pole
Reset: Active Low
Reset Timeout: 65 ms Minimum
Voltage - Threshold: 5.1V
Operating Temperature: -40°C ~ 85°C (TA)
Mounting Type: Surface Mount
Package / Case: 4-SMD, Flat Leads
Supplier Device Package: SNT-4A
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Supervisors

The S-80151BLPF-JFCTFU is a PMIC (Power Management Integrated Circuit) Supervisor from Toshiba Semiconductor and Storage. It is designed to provide fault protection for multiple voltage power supplies. The device combines high transconductance MOSFETs, a temperature monitor, and a watchdog timer into one package. It is typically used in industrial, medical, and military applications.

Application Field of S-80151BLPF-JFCTFU

The S-80151BLPF-JFCTFU is well-suited for a range of applications, including protection of circuits and with power supplies when activated. It is used in industrial applications as an over-temperature, over-current, and over-voltage protection device. It is also used in military and medical applications, such as sensors and controllers, to protect circuits from damage.

Working Principle of S-80151BLPF-JFCTFU

The S-80151BLPF-JFCTFU is a three-channel supervisor which combines protection for over-temperature, over-current, and over-voltage in one device. The device operates in one of two modes, a monitoring mode or a reset mode. In monitoring mode, the device monitors the voltage and temperature levels of the circuit it is protecting. If either exceed the predetermined threshold, the device sends a logic signal to the system it is protecting. This causes the circuit to shut down, preventing potentially damaging conditions from occurring. In reset mode, the device monitors the same conditions as in monitoring mode, but instead of sending a logic signal, it activates a reset signal. This causes the circuit to reset, allowing it to continue functioning without putting the system at risk. The S-80151BLPF-JFCTFU has a watchdog timer which monitors the activity of the system it is protecting. If the activity stops, the watchdog timer generates a reset signal, allowing the system to continue functioning without putting itself at risk.

Conclusion

The S-80151BLPF-JFCTFU is a PMIC Supervisor from Toshiba Semiconductor and Storage. It is designed to provide fault protection in systems with multiple voltage power supplies. It is used in a range of applications, including industrial, medical, and military applications. It monitors voltage and temperature levels and can activate a logic signal or reset signal depending on the application. It also has a watchdog timer to monitor system activity.

The specific data is subject to PDF, and the above content is for reference

Latest Products
MAX16038LLA23+

IC BATTERY BACKUPSupervisor Channel

MAX16038LLA23+ Allicdata Electronics
TC1270ANSBVCTTR-VAO

VOLTAGE DETECTORSupervisor Open Drain or...

TC1270ANSBVCTTR-VAO Allicdata Electronics
TC54VN1802EZB

IC VOLT DETECTOR TO-92-3Supervisor Open ...

TC54VN1802EZB Allicdata Electronics
TC54VC4402EZB

IC VOLT DETECTOR TO-92-3Supervisor Push-...

TC54VC4402EZB Allicdata Electronics
ADM705AR-REEL

IC SUPERVISOR MPU 4.65V WD 8SOICSupervis...

ADM705AR-REEL Allicdata Electronics
XC6108N29DGR-G

IC SUPERVISOR 2.9V 4-USPSupervisor Open ...

XC6108N29DGR-G Allicdata Electronics