S-816A60AMC-BBJT2U

Current - Output:	1A
Supplier Device Package:	SOT-23-5
Package / Case:	SC-74A, SOT-753
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C (TA)
Protection Features:	Over Current
Control Features:	Enable
PSRR:	--
Current - Supply (Max):	40µA
Current - Quiescent (Iq):	1µA
Series:	S-816
Voltage Dropout (Max):	0.1V @ 100mA (Typ)
Voltage - Output (Max):	--
Voltage - Output (Min/Fixed):	6V
Voltage - Input (Max):	16V
Number of Regulators:	1
Output Type:	Fixed
Output Configuration:	Positive
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to S-816A60AMC-BBJT2U

The S-816A60AMC-BBJT2U is a 3.3 volt, 60mA low dropout linear voltage regulator from ON Semiconductor. It is a voltage regulator with a wide range of application fields, specifically designed to provide high efficiency, low-noise and stable operation within an industry-standard Linear package.

The Technical Specifications of S-816A60AMC-BBJT2U

The S-816A60AMC-BBJT2U is capable of providing up to 60mA of continuous output current with a low dropout voltage of 0.35V over a wide voltage range of 1.5V to 5.5V. It also has an input voltage operating range of 1.2V to 6.0V to provide the necessary headroom for noise reduction. The S-816A60AMC-BBJT2U uses a P-channel low-side switch technology which minimizes ground bounce, has an extended common mode voltage range and fast load transient response. It also features a programmable current-limit protection, short circuit and over-temperature protection and an automatic shutdown Low Dropout compare threshold that makes it ideal for applications where the supply line must remain inactive or where only a minimum current is required.

The Working Principle of S-816A60AMC-BBJT2U

The S-816A60AMC-BBJT2U operates on a simple linear voltage-regulating principle. It consists of a PFET switch which switches between a high and low resistance based on the input voltage, a current source and an output stage. The input voltage is divided between the FET switch and the current source, and the output voltage is determined by the current source resistor. The operation of the S-816A60AMC-BBJT2U is based on the voltage feedback loop. The desired output voltage is set by the voltage feedback loop and the output is limited to 60mA. The use of a Low-Dropout regulator (LDO) allows it to operate at a lower input voltage, making it ideal for applications with stringent power requirements. It also provides good voltage stability over a wide temperature range.

Applications of S-816A60AMC-BBJT2U

The S-816A60AMC-BBJT2U is suitable for providing power to a variety of low-power applications, such as for powering mobile phones, PDAs, MP3 players, digital cameras, GPS receivers, smart meters and similar mobile devices. It is also suitable for providing low-voltage , low-power and low-noise operations in battery-powered applications.The S-816A60AMC-BBJT2U can also be used in applications where high dynamic load transients are expected and where high reliability, low-noise, and high efficiency are necessary. This includes power supplies for personal computers, embedded systems, general-purpose data and voice communications, automotive electronic controllers, set-top boxes, disk controllers and other applications where the power supply must remain reliable and stable at all times.

Conclusion

In conclusion, the S-816A60AMC-BBJT2U is a versatile low-dropout linear voltage regulator. Its wide operating voltage range and low dropout voltage allow it to provide reliable and efficient power to low-power applications. Its wide range of protections makes it ideal for use in applications where high dynamic loads transients are expected, and its low noise operation makes it suitable for embedded systems and other applications where low noise is required.

The specific data is subject to PDF, and the above content is for reference