Allicdata Part #: | 1662-1981-2-ND |
Manufacturer Part#: |
S-817A33APF-CUWTFU |
Price: | $ 0.21 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ABLIC U.S.A. Inc. |
Short Description: | IC REG LINEAR 3.3V 50MA SNT4A |
More Detail: | Linear Voltage Regulator IC Positive Fixed 1 Outpu... |
DataSheet: | S-817A33APF-CUWTFU Datasheet/PDF |
Quantity: | 1000 |
5000 +: | $ 0.19051 |
10000 +: | $ 0.18346 |
25000 +: | $ 0.17640 |
Series: | S-817 |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Output Configuration: | Positive |
Output Type: | Fixed |
Number of Regulators: | 1 |
Voltage - Input (Max): | 10V |
Voltage - Output (Min/Fixed): | 3.3V |
Voltage - Output (Max): | -- |
Voltage Dropout (Max): | 0.41V @ 10mA |
Current - Output: | 50mA |
Current - Quiescent (Iq): | 2.5µA |
PSRR: | -- |
Control Features: | -- |
Protection Features: | Short Circuit |
Operating Temperature: | -40°C ~ 85°C (TA) |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, Flat Leads |
Supplier Device Package: | SNT-4A |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The S-817A33APF-CUWTFU is a type of voltage regulator, specifically categorized as a linear regulator. Voltage regulators are power management integrated circuits (PMICs) used to provide a regulated output voltage to a load, regardless of the input voltage. They are used in electrical power systems to provide a steady voltage, usually 5 V or lower. The S-817A33APF-CUWTFU is a 3.3 V linear regulator with an input voltage range of 2 V to 6 V.
A voltage regulator generally contains an error amplifier, a reference voltage, a driver, and a pass device. In the S-817A33APF-CUWTFU, the error amplifier compares the output voltage of the regulator to the reference voltage and calculates the difference between the two. The driver uses the difference to control the current into the pass device, which is usually an N-type metal oxide semiconductor (NMOS) or a p-channel metal oxide semiconductor (PMOS). The driver will either increase or decrease the current to the gate of the NMOS or PMOS, depending on whether the output voltage is lower or higher than the reference voltage. If the output voltage is higher than the reference voltage, the driver will cause the current to the gate of the NMOS or PMOS to decrease, pulling the output voltage down to the reference voltage.
The S-817A33APF-CUWTFU can handle up to 1 A of continuous DC load current and is ideal for use in space-constrained applications. It features an on/off pin to enable or disable the regulator, a PGOOD indicator pin to detect whether the output voltage is within the specified range, and an enable pin that can be used to put the regulator into a low quiescent current state. The S-817A33APF-CUWTFU also features internal output voltage compensation, as well as thermal and current-limit protections.
The S-817A33APF-CUWTFU is widely used in a variety of applications such as motor control, industrial automation, robotics, automotive, and consumer electronics. It is also used in powering microcontrollers, LEDs, sensors, and other low-power devices. The S-817A33APF-CUWTFU is a robust and versatile voltage regulator that can be used in a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
Linear Regulator/LDO Regulator IC 1 Outp...
Linear Regulator IC Positive Fixed 1 Out...
Linear Regulator IC Positive Fixed 1 Out...
Linear Regulator IC Positive Fixed 1 Out...
Charge Pump Switching Regulators, Switch...
Linear Regulator IC Positive Fixed 1 Out...