Allicdata Part #: | S-8333AABC-T8T1G-ND |
Manufacturer Part#: |
S-8333AABC-T8T1G |
Price: | $ 0.46 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ABLIC U.S.A. Inc. |
Short Description: | IC REG CTRLR BOOST 8TSSOP |
More Detail: | Boost Regulator Positive Output Step-Up DC-DC Con... |
DataSheet: | S-8333AABC-T8T1G Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.40837 |
Voltage - Supply (Vcc/Vdd): | 1.8 V ~ 6 V |
Supplier Device Package: | 8-TSSOP |
Package / Case: | 8-TSSOP (0.173", 4.40mm Width) |
Operating Temperature: | -40°C ~ 85°C (TA) |
Control Features: | Current Limit, Frequency Control |
Serial Interfaces: | -- |
Clock Sync: | No |
Synchronous Rectifier: | No |
Duty Cycle (Max): | 89% |
Frequency - Switching: | 280kHz ~ 1.08MHz |
Series: | -- |
Output Phases: | 1 |
Number of Outputs: | 1 |
Topology: | Boost |
Output Configuration: | Positive |
Function: | Step-Up |
Output Type: | Transistor Driver |
Part Status: | Not For New Designs |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
S-8333AABC-T8T1G is a DC DC switching controller that belong to the family of PMIC (Power Management IC) voltage regulators. It can be used to control a variety of electronics powered by a low voltage DC source. It is specifically designed to provide a high efficiency and reliable solution for applications requiring wide input voltage range, low ripple and fast response time.The S-8333AABC-T8T1G is a step-down switching regulator. This type of switching regulator is often used in DC to DC conversion applications, where an input voltage needs to be converted to a lower output voltage. It is used to control the output voltage of an electronic device, such as a laptop or a smartphone, where an input voltage of 5V and a certain output voltage, such as 1V or 3.3V, is required.The S-8333AABC-T8T1G offers two main operating Modes as well as a range of features to help ensure converter efficiency and stability. The Constant-Voltage Mode (CV) provides output voltage regulation, and the Constant-Current Mode (CC) provides output current regulation with both modes offering adjustable set point. In addition, the S-8333AABC-T8T1G has over temperature, over voltage, inrush current limiting, and adjustable frequency control for optimizing converter performance.The S-8333AABC-T8T1G also provides control and protection features to ensure the reliability of the output voltage and to protect the equipment against electrics. It has a wide input voltage range, and can support up to 8A output current. The regulator features active current foldback, which reduces the current limit during overload conditions, as well as over-temperature and over-voltage protection.The working principle of the S-8333AABC-T8T1G is based on Switching Buck Converter. This type of converter is a kind of linear electric network that takes the input voltage and converts it into a lower voltage output. A switching buck converter has a control circuit with a power switch that is used to turn the converter ON and OFF.When the power switch is turned ON, electric current flows through the power switch, which then causes electric current to be delivered to the load through the output inductor. Current will continue to flow until the power switch is turned OFF. The output voltage is regulated by a loop circuit that controls the duty cycle of the power switch.The output voltage is regulated by adjusting the duty cycle of the power switch. When the output voltage is higher than the desired output voltage, the duty cycle of the power switch is decreased and the current limit is reduced. When the output voltage is lower than the desired voltage, the duty cycle is increased and the current limit is increased.With its wide range of features, the S-8333AABC-T8T1G is ideal for a variety of applications including chargers, power management systems, LED lighting, and more. It is an excellent choice for converting an input voltage to a lower output voltage, with support for both constant voltage and constant current modes. It is also ideal for use in applications that require temperature and over-voltage protection, input voltage range, and adjustable frequency control.
The specific data is subject to PDF, and the above content is for reference
Switching Controller Polyphase Bidirecti...
IC POWER MANAGEMENTBuck-Boost Regulator ...
IC REG CTRLR BUCK 8-PSOPBuck Regulator P...
IC REG CTRLR BUCK 16TSSOPBuck Regulator ...
IC REG CTRLR BUCK 14TSSOPBuck Regulator ...
IC REG CTRLR BUCK/SEPIC 32QFNBuck Regula...