Allicdata Part #: | S-8333AACA-T8T1G-ND |
Manufacturer Part#: |
S-8333AACA-T8T1G |
Price: | $ 0.46 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ABLIC U.S.A. Inc. |
Short Description: | IC REG CTRLR BOOST 8TSSOP |
More Detail: | Boost Regulator Positive Output Step-Up DC-DC Con... |
DataSheet: | S-8333AACA-T8T1G Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.40837 |
Voltage - Supply (Vcc/Vdd): | 1.8 V ~ 6 V |
Supplier Device Package: | 8-TSSOP |
Package / Case: | 8-TSSOP (0.173", 4.40mm Width) |
Operating Temperature: | -40°C ~ 85°C (TA) |
Control Features: | Current Limit, Frequency Control |
Serial Interfaces: | -- |
Clock Sync: | No |
Synchronous Rectifier: | No |
Duty Cycle (Max): | 89% |
Frequency - Switching: | 280kHz ~ 1.08MHz |
Series: | -- |
Output Phases: | 1 |
Number of Outputs: | 1 |
Topology: | Boost |
Output Configuration: | Positive |
Function: | Step-Up |
Output Type: | Transistor Driver |
Part Status: | Not For New Designs |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The S-8333AACA-T8T1G is a DC DC switching controller by SII Semiconductor Corporation. Offering the highest possible efficiency, it is the perfect solution for a wide range of applications including automotive, telecommunications and industrial electronics.
The S-8333AACA-T8T1G is a synchronous step-down switching controller with 0.12Ω internal power switches, which offers 700V of MOSFET operating range and a programmable soft-start. It also provides protection against overvoltage, current limit and thermal protection.
This device integrates a high-side pre-driver, which offers over-current protection, a soft-start function, and adjustable frequency. It also supports a high peak-current drive that is ideal for applications with high load capacitance. It can be used in buck or quasi-resonant topologies for efficiency-boosting applications.
The S-8333AACA-T8T1G operates in a continuous multi-pulse spread spectrum mode, allowing the controller to reduce total system noise. It is suitable for applications with a high input voltage range and a wide load range. It can be programmed to operate in either CCM (conversational continuous mode), DCM (discontinuous current mode) or both modes.
The S-8333AACA-T8T1G features PWM/PFM control and pulse-skipping modes. It also offers bi-directional OVP (overvoltage protection) and a programmable soft-start time. The high-side pre-driver is capable of in-rush current protection and supports a high peak-current drive for capacitive loads.
The S-8333AACA-T8T1G is an ideal device for automotive, telecommunications and industrial electronics-related applications that require high-efficiency and reliable performance. It can be used in buck or quasi-resonant topologies for efficient conversion. It is also suitable for applications with a high input voltage range and wide load range.
In conclusion, the S-8333AACA-T8T1G is an advanced DC DC switching controller with a wide range of features and protection mechanisms that make it an ideal choice for a variety of applications. It offers high efficiency, reliable performance, and protection against overvoltage, current limit, and thermal protection. This makes it one of the most reliable and efficient DC DC controllers on the market.
The specific data is subject to PDF, and the above content is for reference
Switching Controller Polyphase Bidirecti...
IC POWER MANAGEMENTBuck-Boost Regulator ...
IC REG CTRLR BUCK 8-PSOPBuck Regulator P...
IC REG CTRLR BUCK 16TSSOPBuck Regulator ...
IC REG CTRLR BUCK 14TSSOPBuck Regulator ...
IC REG CTRLR BUCK/SEPIC 32QFNBuck Regula...