S-8340C25AFT-T2-U

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A DC-DC switching controller is a type of voltage regulator often used to ensure stable and accurate power delivery in devices and circuits. The S-8340C25AFT-T2-U, offered by Renesas, is a versatile controller capable of many tasks within the deep-voltage and power domains. This article examines various applications, the controller’s impressive features, and the device’s workings.

Applications

Thanks to its adaptability and flexibility, the S-8340C25AFT-T2-U can be used in a wide variety of applications such as mobile phones, tablets, computers, and electronic appliances. This controller can also be employed in electric power systems and automotive electronics, and is an excellent choice for mission critical applications.

The DC-DC controller can be used in adjustable output voltages. When operating below 4.5 volts, the accurate output voltage stability is 1.5%. Above 4.5 volts, the accuracy drops to 5%. This makes it ideal for applications where tight voltage control is required.

Features of the S-8340C25AFT-T2-U

The features of the S-8340C25AFT-T2-U make it a desirable choice for the engineer. The core of the controller is the “PMICP” voltage positioning module. This module takes two power inputs, outputs a voltage in between them, and then adjusts the output based on the needs of the circuitry. This makes the module ideal for applications where power input and output must be fine-tuned.

The S-8340C25AFT-T2-U also has advanced fault correction logic. This allows the controller to react to potential faults in the power input and output, and automatically correct the error. This ensures that the output is always correct, and the device does not have to be restarted.

The integrated gate driver enables efficient compensation for the power MOSFET gate drive. The gate driver is capable of driving up to 4A and will switch at up to 250kHz. This ensures that power delivery is smooth and efficient.

The S-8340C25AFT-T2-U also has a power-management feature, which helps reduce power consumption. This feature allows the device to function at a low current drain when the output current is low, conserving energy and increasing efficiency. The power-management feature also makes the device a good choice for applications where battery life is important.

Working Principle

The S-8340C25AFT-T2-U uses a comparator circuit to compare the reference voltage with the input voltage. When the voltage exceeds the reference voltage, the comparator generates an output current, which is fed to the power MOSFET, driving the device into saturation. This causes the output voltage to increase, until the reference voltage is once again achieved. When the voltage drops, the comparator output shuts down, and the output voltage drops. This fluctuation of the output voltage is maintained by a feedback loop, ensuring that the output voltage is accurate and stable.

The S-8340C25AFT-T2-U also features over-current protection, which protects the controller from short circuits. If the current exceeds a safe limit, the device will automatically shut off, preventing damage to the controller or system.

The S-8340C25AFT-T2-U is a powerful and versatile DC-DC switching controller that can be used in a wide range of applications. It features an impressive array of features, such as an integrated PMICP voltage positioning module, advanced fault correction logic, and a power-management feature. It also has a working principle based on a comparator circuit and feedback loop.

The specific data is subject to PDF, and the above content is for reference