Allicdata Part #: | S-8341A33AFT-T2-U-ND |
Manufacturer Part#: |
S-8341A33AFT-T2-U |
Price: | $ 0.54 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ABLIC U.S.A. Inc. |
Short Description: | IC REG CTRLR BOOST 8TSSOP |
More Detail: | Boost Regulator Positive Output Step-Up DC-DC Con... |
DataSheet: | S-8341A33AFT-T2-U Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.48308 |
Voltage - Supply (Vcc/Vdd): | 0.8 V ~ 6 V |
Supplier Device Package: | 8-TSSOP |
Package / Case: | 8-TSSOP (0.173", 4.40mm Width) |
Operating Temperature: | -40°C ~ 85°C (TA) |
Control Features: | Current Limit, Enable, Soft Start |
Serial Interfaces: | -- |
Clock Sync: | No |
Synchronous Rectifier: | No |
Duty Cycle (Max): | 89% |
Frequency - Switching: | 600kHz |
Series: | -- |
Output Phases: | 1 |
Number of Outputs: | 1 |
Topology: | Boost |
Output Configuration: | Positive |
Function: | Step-Up |
Output Type: | Transistor Driver |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
S-8341A33AFT-T2-U Application Field and Working Principle
The S-8341A33AFT-T2-U is a DC/DC switching controller used in a wide variety of systems. These include, but are not limited to, three-phase motor control systems, load-proof components, AC/DC converters, circuit protection systems, solar systems, and other digital and analog systems. In general, it is used in devices that need to regulate power by adjusting of the output voltage.
The S-8341A33AFT-T2-U can be divided into two parts: the regulating component and the control component. The regulating component is the part of the device that determines how much power is drawn from the input source. This component is made up of a high-speed power FET that switches power according to the desired output voltage. The control component is responsible for adjusting the voltage according to the input, and for providing feedback to the regulating component.
The S-8341A33AFT-T2-U works by drawing power from an input source (usually a battery, DC power supply or wall outlet) and regulating the output voltage according to the desired settings. The device uses pulse-width modulation (PWM) to control the output voltage. This is done by switching power on and off in very short pulses, which causes the duty cycle to vary and thus the output voltage is adjusted accordingly.
In addition to regulating the output voltage, the S-8341A33AFT-T2-U also provides overvoltage protection, an adjustable current limit, and a cycle-by-cycle surge current protection. These features make the device suitable for use in a variety of applications, as it is able to protect against overloads and short-circuits. The device also includes fault/shutdown logic, which powers down in case of an overvoltage or overcurrent situation.
The S-8341A33AFT-T2-U is a highly reliable device that is easy to integrate into various applications. It is designed to provide high-efficiency power conversion with low losses and has a low standby power consumption. As such, it is ideal for a wide range of applications in the industrial, automotive, and consumer markets.
The specific data is subject to PDF, and the above content is for reference
Switching Controller Polyphase Bidirecti...
IC POWER MANAGEMENTBuck-Boost Regulator ...
IC REG CTRLR BUCK 8-PSOPBuck Regulator P...
IC REG CTRLR BUCK 16TSSOPBuck Regulator ...
IC REG CTRLR BUCK 14TSSOPBuck Regulator ...
IC REG CTRLR BUCK/SEPIC 32QFNBuck Regula...