Allicdata Part #: | 1662-3304-2-ND |
Manufacturer Part#: |
S-8356Q18MC-OYDT2U |
Price: | $ 0.39 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ABLIC U.S.A. Inc. |
Short Description: | IC REG CTRLR BOOST SOT23-5 |
More Detail: | Boost Regulator Positive Output Step-Up DC-DC Con... |
DataSheet: | S-8356Q18MC-OYDT2U Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.35280 |
6000 +: | $ 0.33516 |
15000 +: | $ 0.32256 |
Voltage - Supply (Vcc/Vdd): | 0.9 V ~ 10 V |
Supplier Device Package: | SOT-23-5 |
Package / Case: | SC-74A, SOT-753 |
Operating Temperature: | -40°C ~ 85°C (TA) |
Control Features: | Enable |
Serial Interfaces: | -- |
Clock Sync: | No |
Synchronous Rectifier: | No |
Duty Cycle (Max): | 85% |
Frequency - Switching: | 600kHz |
Series: | -- |
Output Phases: | 1 |
Number of Outputs: | 1 |
Topology: | Boost |
Output Configuration: | Positive |
Function: | Step-Up |
Output Type: | Transistor Driver |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The S-8356Q18MC-OYDT2U is a high-efficiency, fixed frequency, triple-output, step-down DC-DC switching controller. This topology can be used to provide low electrical noise, low output voltage ripple and improved dynamic response when compared to other conventional buck-mode converters. The S-8356Q18MC-OYDT2U has the ability to work with both regulated and unregulated external sources, and it utilizes switching frequency breaking to reduce idling current and dynamic losses.
Application Fields
The S-8356Q18MC-OYDT2U is well suited for a range of DC/DC applications, from powering small electronic devices to powering larger industrial systems. This single-chip solution is capable of driving up to three outputs with a rated efficacy of 95%, providing a reduced size and high efficiency power supply solution for a variety of applications.
- LCD TV’s
- Portable computers and portable electronics
- Set-top boxes and Blu-ray players
- Industrial equipment
- Automotive audio and navigation systems
Working Principle
The device employs a two-phase, triple-output switching regulator. Each output is separately controlled, allowing the current and voltage of all three outputs to be independently optimized. The device is driven by an externally generated control signal, such as from a PWM signal generator. The voltage regulator, which is located inside the device, is sensitive to changes in output voltage and adjusts its operation accordingly.
When the output voltage on any of the three outputs drops below the desired level, the device senses this and temporarily increases the duty cycle of that output, thus increasing the voltage. Since the device works on a two-phase switching principle, the voltage also increases on both of the other outputs and the device is capable of supplying up to 1A per output.
The device is capable of operating with a wide input voltage range (2.3V to 5.5V) and a switching frequency up to 2.2 MHz. An external resistor is required to select the desired switching frequency and the device is protected against under-voltage and over-current conditions.
The S-8356Q18MC-OYDT2U is a highly versatile and efficient power supply solution which is ideal for applications where high efficiency and low power consumption are essential.
The specific data is subject to PDF, and the above content is for reference
Switching Controller Polyphase Bidirecti...
IC POWER MANAGEMENTBuck-Boost Regulator ...
IC REG CTRLR BUCK 8-PSOPBuck Regulator P...
IC REG CTRLR BUCK 16TSSOPBuck Regulator ...
IC REG CTRLR BUCK 14TSSOPBuck Regulator ...
IC REG CTRLR BUCK/SEPIC 32QFNBuck Regula...