S-8520F27MC-BNMT2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The S-8520F27MC-BNMT2G DC DC Switching Controller from Renesas Electronics is a high-efficiency, high-frequency synchronous DC-DC controller designed to extend battery life, reduce power consumption, and improve system safety. It is suited for a variety of applications including DC-DC converters, power supply systems, LED lighting, and motor control. Its features include a switching frequency of up to 1 MHz, external voltage feedback, and PWM/PFM control, as well as several overload protection features.

The S-8520F27MC-BNMT2G DC DC Switching Controller utilizes a buck/boost topology and uses its internal oscillator to control the on/off cycles of the switch, enabling intelligent, switch-mode power supplies to be created. Internally, its DC-DC method employs a voltage feedback loop to control the output voltage, generating higher efficiency at both light and full loads than traditional linear regulators. This enable very low levels of current consumption during light-load conditions, and higher efficiency during heavy-load conditions — both of which are important battery saving features.

The onboard comparator serves as the primary control loop for the S-8520F27MC-BNMT2G DC DC Switching Controller. This comparator compares the internal reference voltage, or the external feedback voltage, to the output. If the output rises above the reference voltage, the comparator sends a signal to the PWM/PFM control block to reduce the duty-cycle. Conversely, if the voltage falls below the reference voltage, the comparator signals the PWM/PFM control block to increase the duty-cycle.

The S-8520F27MC-BNMT2G DC DC Switching Controller also has a number of safety features, such as overvoltage and overcurrent protection. The overvoltage protection limiter (OLP) can be set by an external component so if the output voltage reaches the pre-set limit, it will shut off the device and provide protection against overvoltage. The overcurrent protection limiter (OCP) will shut down the device if current reaches the limit set by an external component.

The S-8520F27MC-BNMT2G DC DC Switching Controller has a wide range of applications that include DC-DC converters, power supply systems, LED lighting, and motor control. In the power supply system, for example, the S-8520F27MC-BNMT2G is used to provide a low output voltage from a higher input voltage. The controller can also be used in an LED lighting system to efficiently power the lighting from a higher voltage power source. Additionally, the controller can be used in motor control systems, as it provides a high efficiency, high precision power conversion.

The S-8520F27MC-BNMT2G DC DC Switching Controller is an ideal solution for designs requiring high efficiency, low input current, and a wide operating range. Its integrated safety features provide reliable protection, while its intelligent control capabilities make the controller ideal for a variety of applications ranging from power supply systems to motor-control designs. With a high switching frequency, external voltage feedback, and PWM/PFM control, along with its numerous overload protection features, the S-8520F27MC-BNMT2G provides an ideal solution for a variety of industrial and automotive designs.

The specific data is subject to PDF, and the above content is for reference