Allicdata Part #: | S-8533A27AFT-TB-U-ND |
Manufacturer Part#: |
S-8533A27AFT-TB-U |
Price: | $ 0.78 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ABLIC U.S.A. Inc. |
Short Description: | IC REG CTRLR BUCK 8TSSOP |
More Detail: | Buck Regulator Positive Output Step-Down DC-DC Co... |
DataSheet: | S-8533A27AFT-TB-U Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.70251 |
Specifications
Voltage - Supply (Vcc/Vdd): | 2.7 V ~ 16 V |
Supplier Device Package: | 8-TSSOP |
Package / Case: | 8-TSSOP (0.173", 4.40mm Width) |
Operating Temperature: | -40°C ~ 85°C (TA) |
Control Features: | Enable, Soft Start |
Serial Interfaces: | -- |
Clock Sync: | No |
Synchronous Rectifier: | Yes |
Duty Cycle (Max): | 100% |
Frequency - Switching: | 300kHz |
Series: | -- |
Output Phases: | 1 |
Number of Outputs: | 1 |
Topology: | Buck |
Output Configuration: | Positive |
Function: | Step-Down |
Output Type: | Transistor Driver |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The S-8533A27AFT-TB-U is a DC to DC switching controller, a DC Voltage Regulator, specifically designed as an integrated circuit which provides a higher degree of precision in controlling the amount of power delivered to an electronic device or system. It is an integrated circuit which manages the input and output of an electronic device or system, using a voltage regulator for the output. The controller is designed to deliver the current and the voltage needed for a specific application and to ensure that no damage is caused due to power interruptions and irregularities.The S-8533A27AFT-TB-U has an on-board micro controller which has various functions to monitor the current and voltage of the application, and to then adjust the output voltage and current to the optimal level. The controller is also capable of providing thermal protection. The controller can also be used to protect the device or system in cases of over temperature and can provide a warning when the voltage and current levels of the system are not within the specified limits.One of the key features of this controller is the ability to provide a high speed digital interface, allowing for a more efficient data transfer between the devices. The controller can be used in situations where a fast, reliable and accurate communication between the devices is needed. The controller also has a number of built-in features to ensure the safe operation of the system, such as providing protection against reverse polarity, back voltage and over voltage.The controller can be used in a variety of applications, including automotive, telecommunication and computers. The S-8533A27AFT-TB-U can also be used in high frequency radio equipment, such as mobile phones and GPS tracking systems. In addition, the controller can be used in applications such as battery chargers, LED and fluorescent light dimmers and LED lightning systems.The work principle of the S-8533A27AFT-TB-U is based on a buck-boost converter architecture. It is a type of switching controller which operates by regulating the output power based on the input power. The controller operates by controlling the output to an optimal level while maintaining a constant voltage level. This is done by monitoring the input and output voltage levels and then adjusting the output voltage through a control signal.The S-8533A27AFT-TB-U requires very low levels of current input to work properly. It is therefore important to ensure that the total device current requirement is not too high, as the controller can be damaged or operate erratically if the total current requirements exceed the device\'s power supply range.In summary, the S-8533A27AFT-TB-U is a DC to DC switching controller that is an integrated circuit which provides a higher degree of precision in controlling the amount of power delivered to an electronic device or system. It has an on-board micro controller which is capable of providing thermal protection, as well as providing high speed digital interface between the devices. The controller is designed for a variety of applications such as automotive, telecommunication, computers and high frequency radio equipment. It is based on a buck-boost converter architecture and requires very low levels of current input to work properly.
The specific data is subject to PDF, and the above content is for reference
Latest Products
LM5170PHPT
Switching Controller Polyphase Bidirecti...
LTC3785EUF
IC POWER MANAGEMENTBuck-Boost Regulator ...
AP3586CMPTR-G1
IC REG CTRLR BUCK 8-PSOPBuck Regulator P...
MAX5069AAUE
IC REG CTRLR BUCK 16TSSOPBuck Regulator ...
LM2745MTCX
IC REG CTRLR BUCK 14TSSOPBuck Regulator ...
LTC3890MPUH#TRPBF
IC REG CTRLR BUCK/SEPIC 32QFNBuck Regula...