| Allicdata Part #: | S-8533A41AFT-TB-G-ND |
| Manufacturer Part#: |
S-8533A41AFT-TB-G |
| Price: | $ 0.78 |
| Product Category: | Integrated Circuits (ICs) |
| Manufacturer: | ABLIC U.S.A. Inc. |
| Short Description: | IC REG CTRLR BUCK 8TSSOP |
| More Detail: | Buck Regulator Positive Output Step-Down DC-DC Co... |
| DataSheet: |  S-8533A41AFT-TB-G Datasheet/PDF |
| Quantity: | 1000 |
| 3000 +: | $ 0.70251 |
| Voltage - Supply (Vcc/Vdd): | 2.7 V ~ 16 V |
| Supplier Device Package: | 8-TSSOP |
| Package / Case: | 8-TSSOP (0.173", 4.40mm Width) |
| Operating Temperature: | -40°C ~ 85°C (TA) |
| Control Features: | Enable, Soft Start |
| Serial Interfaces: | -- |
| Clock Sync: | No |
| Synchronous Rectifier: | Yes |
| Duty Cycle (Max): | 100% |
| Frequency - Switching: | 300kHz |
| Series: | -- |
| Output Phases: | 1 |
| Number of Outputs: | 1 |
| Topology: | Buck |
| Output Configuration: | Positive |
| Function: | Step-Down |
| Output Type: | Transistor Driver |
| Part Status: | Not For New Designs |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The S-8533A41AFT-TB-G is one of the most popular DC-DC switching controllers on the market today. It is a cost-effective and reliable controller that offers high efficiency and low noise operation. It is ideal for applications that require low power and high currents, such as motor control, power conversion, and power supply designs. This controller can also be used in battery-operated systems and power management applications.
The S-8533A41AFT-TB-G consists of a high current DC-DC switching regulator, a low noise operational amplifier, and MOSFET driver circuitry. The switching regulator operates with a feedback voltage set by an external resistor divider. The low noise operational amplifier is connected to the voltage divider and drives the MOSFET driver circuitry. The MOSFET driver has protected outputs for driving external MOSFETs. The S-8533A41AFT-TB-G has high efficiency and low output ripple, making it suitable for a variety of applications.
The S-8533A41AFT-TB-G is suitable for a variety of applications such as motor control, power conversion, AC-DC power supplies, battery-operated devices, and power management. The controller can be used to build DC-DC converters with variable output, or as part of an isolated regulator technology. It is also ideal for use in power supplies where low noise operation is desired. The S-8533A41AFT-TB-G has very low harmonic distortion and can achieve high efficiency with a full range of output power.
The working principle of the S-8533A41AFT-TB-G is based on a feedback voltage control loop. The controller takes in a reference voltage from a voltage divider and uses it to compare to an internal reference voltage. The difference is then used to adjust the output voltage of the voltage regulator. The output voltage is determined by the voltage divider network, the voltage feedback gain, and the loop gain of the control circuit.
The S-8533A41AFT-TB-G is an effective and low cost controller that is suitable for a variety of applications. It provides high efficiency and low noise operation while also providing a wide range of output voltage options. It is a cost-effective solution for motor control, power conversion, AC-DC power supplies, battery-operated devices, and power management. This controller is ideal for applications that require low power and high current. The S-8533A41AFT-TB-GDC-DC switching controller is a reliable and cost-effective solution for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Switching Controller Polyphase Bidirecti...
IC POWER MANAGEMENTBuck-Boost Regulator ...
IC REG CTRLR BUCK 8-PSOPBuck Regulator P...
IC REG CTRLR BUCK 16TSSOPBuck Regulator ...
IC REG CTRLR BUCK 14TSSOPBuck Regulator ...
IC REG CTRLR BUCK/SEPIC 32QFNBuck Regula...