| Allicdata Part #: | 1662-2099-2-ND |
| Manufacturer Part#: |
S-89110BFM-H4A-TFU |
| Price: | $ 0.20 |
| Product Category: | Integrated Circuits (ICs) |
| Manufacturer: | ABLIC U.S.A. Inc. |
| Short Description: | IC OP AMP CMOS 180KHZ 8TMSOP |
| More Detail: | CMOS Amplifier 2 Circuit 8-TMSOP |
| DataSheet: |  S-89110BFM-H4A-TFU Datasheet/PDF |
| Quantity: | 1000 |
| 4000 +: | $ 0.17813 |
| 8000 +: | $ 0.16585 |
| 12000 +: | $ 0.15971 |
| 28000 +: | $ 0.15356 |
| Current - Input Bias: | 1pA |
| Supplier Device Package: | 8-TMSOP |
| Package / Case: | 8-WSSOP, 8-MSOP (0.110", 2.80mm Width) |
| Mounting Type: | Surface Mount |
| Operating Temperature: | -40°C ~ 85°C |
| Voltage - Supply, Single/Dual (±): | 1.8 V ~ 5.5 V |
| Current - Output / Channel: | 9mA |
| Current - Supply: | 50µA |
| Voltage - Input Offset: | 4mV |
| Series: | -- |
| Gain Bandwidth Product: | 180kHz |
| Slew Rate: | 0.07 V/µs |
| Output Type: | -- |
| Number of Circuits: | 2 |
| Amplifier Type: | CMOS |
| Part Status: | Active |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The S-89110BFM-H4A-TFU is a linear amplifier that is classified as an instrumentation amplifier, op amp, and buffer amp, and is designed to meet certain specifications. This product has a high linearity of 8.5 dB, wide bandwidth of > 100 MHz, and fast response time of 10ns. It also has excellent RF noise rejection and high gain accuracy, making it ideal for a variety of application areas.
The S-89110BFM-H4A-TFU is typically used for applications that require an ultra-high precision amplifier that is able to provide reliable results with minimal distortion. It also can be used in precision measurement and control applications such as sensors and motor control. Additionally, it is also suitable for high-frequency telecommunications applications, wireless systems, and medical instrumentation.
The S-89110BFM-H4A-TFU can be used in multiple operating mode configurations, such as a single-ended output and differential outputs. Its design is adjustable and allows for both a positive and a negative gain to help optimize for the best performance for a variety of applications. To maximize the power of the amplifier, it has a gain stabilization network, which helps to maintain the highest gain for the most accurate results.
The working principle of the S-89110BFM-H4A-TFU is simple, yet powerful. It amplifies the input signal to an appropriate level, and then filters it to reduce any distortion and other noise. The filtered signal is then reduced to a voltage between ground and the supply voltage, and is then amplified again. This amplification and filtering process helps to ensure that the output signal produced is as clean and accurate as possible.
The S-89110BFM-H4A-TFU is a powerful linear amplifier and is suitable for a range of high-precision applications. With its high linearity, wide bandwidth, fast response time, and excellent RF rejection, it is one of the best instruments available for sensing, control and field instrumentation applications. Its adjustable gain and stability make it a versatile amplifier for any application that requires precision and accuracy.
The specific data is subject to PDF, and the above content is for reference
Ultra Precision Current Sense Amplifier ...
Operational Amplifiers - 4-Channel, 10MH...
IC OPAMP GP 600KHZ 8SOICGeneral Purpose ...
IC OPAMP VFB 150MHZ 8UMAXVoltage Feedbac...
IC OPAMP VFB 215MHZ SOT23-5Voltage Feedb...
IC OPAMP BUFFER 660MHZ 8SOICBuffer Ampli...