S02B-ZESK-2D(T)(LF)(SN)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular Connectors - Headers, Male Pins are widely used in all kinds of electronic products. S02B-ZESK-2D(T)(LF)(SN) is one of them. It is a 2.54mm pitch rectangular connector. It is divided into on-board connectors and terminal blocks. In addition, it is divided into wire-to-wire connectors and wire-to-board connectors from the perspective of structure.

S02B-ZESK-2D(T)(LF)(SN)\'s application field includes a wide range of electronic products, such as simultaneous real-time data acquisition units, multimeter, frequency counter, test system, electric power system, gas alarm system, fuel sensor and speedometer. In addition, it supports a variety of voltage and current levels, and is widely used in heavy-load equipment, home appliances, and general industrial equipment.

The working principle of S02B-ZESK-2D(T)(LF)(SN) is based on the structure of the contact terminal. In the on-board connector, the contact pin is used to connect multiple lines with the header. During operation, when the two copper plates inside the header contact the pin, they will make an electric current connection. When a load is applied, the pin will be tightened in the header, and the electric current can be transmitted well.

S02B-ZESK-2D(T)(LF)(SN) is provided with shielding capability. When high-frequency signal, high-speed signal, high-power signal lines are used, shielding measures should be taken to ensure that signals are not affected by space interference. Therefore, this type of connector is equipped with a shielding shell which is connected to the ground in order to achieve the shielding effect.

In addition, the S02B-ZESK-2D(T)(LF)(SN) is provided with a dust prevention and waterproofing shell, which is basically used in places where there is a lot of dust or moisture. The dust prevention shell is made of high-strength material to protect the inner parts of the connector from dust and other particles, and the waterproof shell is also made of high-strength material to protect the connector against moisture and water.

The S02B-ZESK-2D(T)(LF)(SN) also provides anti-corrosion protection. In order to reduce the corrosion effect of the contact terminal on the electric signal, it is designed with a gold plating surface and anti-corrosion materials such as tin-plated or plated nickel. At the same time, in order to guarantee the good electrical connection performance of the two contact surfaces, a special lubricant can also be added at the time of assembly.

The S02B-ZESK-2D(T)(LF)(SN) connector is a reliable electricity transmission component in the automatic control industry. It has a wide application field, a mature working principle, and a complete range of safety measures such as dust prevention, waterproofing, and anti-corrosion, which makes it an ideal choice for many types of electronic products.

The specific data is subject to PDF, and the above content is for reference