S101S06F

Series:	S101
Packaging:	Tube
Part Status:	Obsolete
Mounting Type:	Through Hole
Circuit:	SPST-NO (1 Form A)
Output Type:	AC, Zero Cross
Voltage - Input:	1.2VDC
Voltage - Load:	80V ~ 120V
Load Current:	3A
Termination Style:	PC Pin
Package / Case:	4-SIP
Supplier Device Package:	4-SIP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Solid State Relays (SSRs) are a type of electronic switching device that are capable of switching high-frequency or high-power AC and DC power. The SSR utilizes semi-conductor and insulation materials, as well as an opto-isolator, instead of mechanical contacts, making them act as a switch with no moving parts and negligible contact arcing. The S101S06F is a solid state relay that is a typical innovation in the field.

Functionality

The basic purpose of the S101S06F relay is to interface electrical signals of two circuits that can be of different polarities. The relay is designed to be used in a variety of applications, such as motor starters, illuminating light switches, remote control switches, low power microwave ovens, door openers, and much more. Its versatility and adaptability are a major benefit to the users of this particular SSR.

Design and Principle of Operation

The design of the S101S06F allows it to easily and quickly change over a low voltage DC input into a high voltage AC output. It is composed of two main parts, an AC output stage and a DC control stage. The AC output stage is composed of a series of diodes that are connected together into a bridge configuration and is connected to the AC output. On the DC control stage, the input is connected to an opto-isolator. The opto-isolator consists of a light emitting diode (LED) and a phototransistor. The LED is used to turn on the phototransistor. This causes the output to change, thus allowing either power or actuation of the connected device. The S101S06F operates on zero-crossing control, which means it only changes its state when the applied AC signal crosses the zero-voltage point. This protects the connected load from any rapid voltage surges that can damage the device. The S101S06F is also designed to have a low output leakage current of less than 1mA. This helps maintain the protection of the load by minimizing the amount of power loss each time the relay is switched in or out of service.

Applications and Benefits

The S101S06F is typically used in a variety of industrial and consumer applications where high-frequency and high-power AC and DC signals need to be switched quickly and with high reliability. These applications include, but are not limited to, motor starters, light switches, circuit breakers, remote control switches, low power microwave ovens, door openers, etc. The advantages of using the S101S06F are that it provides high-speed switching, is capable of switching between different polarities, and has a low output leakage current. Additionally, it is versatile and can be used in a variety of applications.

Conclusion

The S101S06F is a reliable and versatile solid state relay that can be used in several industrial and consumer applications to quickly and safely switch AC and DC signals. Its low output leakage current and zero-crossing control provide it with the ability to protect connected loads from damage. Overall, its functionality and design make it a great choice for those looking for a reliable switching device for their needs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description