S1J-M3/61T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The S1J-M3/61T is a semiconductor device commonly used in rectifier applications. It comprises a single diode with a large cathode, which can carry large currents at low voltage, and a small anode, which is suitable for multiple current paths. The S1J-M3/61T is designed mainly to rectify alternating current to direct current. It can also be used in battery chargers, switching mode power supplies, voltage converters and as an interface between high voltage and low voltage lines.

When an alternating current is applied to the S1J-M3/61T, the diode will only conduct on a positive cycle and remain nonconductive during the negative cycle. During the positive cycle, the anode of the diode becomes more positive than the cathode, allowing current to pass through the diode and be rectified to Direct Current. During the negative cycle, the polarity of the diode changes and the cathode becomes more positive than the anode, preventing current from passing through. This process is known as rectification, and it is essential for the effective conversion of alternating current to direct current.

The S1J-M3/61T has a peak repetition rate of 1,500 volts and a continuous operating voltage of 600 volts. It has a forward voltage drop of 0.7 volts and a reverse voltage of 1 volt. It has a maximum current rating of 600 Amps and a maximum surge current of 850 Amps. It also has a capacitive load of 3,000 pF. Although the diode cannot be used in high frequency operations, it is ideal for applications that require high current at low voltage.

The S1J-M3/61T is a versatile device, suitable for a wide range of applications. It is used extensively in power electronic circuits such as switching mode power supplies and voltage converters. It is also used in battery chargers and LED drivers, as an interface between high and low voltage lines, and as an EMC filter in consumer electronics.

The S1J-M3/61T is a reliable, cost-effective solution for rectification applications. Its ability to handle large currents at low voltage makes it an ideal choice for both commercial and industrial applications. Its high surge current and long life expectancy make it a preferred choice for high performance applications. Furthermore, its low forward voltage drop makes it an energy-efficient option.

The specific data is subject to PDF, and the above content is for reference