S1M-M3/5AT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A power diode is a device that allows current to flow in only one direction. The most basic type of power diode is a rectifier diode, which is used to convert alternating current (AC) to direct current (DC). One type of rectifier diode is the S1M-M3/5AT. This type of diode has an anode (positive) terminal, a cathode (negative) terminal, and a body.

S1M-M3/5AT diodes are used in a variety of applications, such as power supplies and in AC-to-DC converters, switching circuits, and rectification circuits. The S1M-M3/5AT is widely used in power supplies, automotive, and in medical equipment. The S1M-M3/5AT has a tolerance voltage rating of 6.0kV (Surge 8.3ms Single Half sine-wave Superimposed on Rated Load) and can handle currents up to 1.4A.

The S1M-M3/5AT power diode has a PIV (peak inverse voltage) rating of 600 volts and a maximum average current rating of 1.4 amp. The maximum forward power dissipation rating is 0.42 watts and the maximum reverse power dissipation rating is 0.25 watts. The device has a good commutation characteristics with the ability to handle higher reverse recovery time, even at high frequencies.

The working principle of a power diode is quite simple. When the applied voltage is forward bias, which means that the anode of the diode is at a higher potential than the cathode, current is allowed to flow through the diode from the anode to the cathode. This is referred to as direct current (DC) or forward current. On the other hand, when the applied voltage is in reverse bias, the cathode becomes more positive than the anode and the diode does not allow the current to flow, resulting in the diode being in the off state.

When dealing with high voltages, power diodes are used in pairs to make a full-wave rectifier. This is done by placing two diodes in opposite directions, creating two equal but opposite current flow directions. The forward current will only flow through one of the diodes while the other one is in a reversed biased state and the same is true for the reverse current. This effectively results in a full-wave rectification.

Power diodes such as the S1M-M3/5AT are an important component for any device that requires conversion of AC to DC power. The S1M-M3/5AT power diode is a popular choice due to its high efficiency, high current handling capability, and low forward voltage drop. It is commonly used in a variety of applications such as power supplies, automotive, and medical equipment.

The specific data is subject to PDF, and the above content is for reference