S25FS256SAGMFB001

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The S25FS256SAGMFB001 is a low-powered, 256Mb SPI NOR Flash memory device which provides the largest capacity for non-volatile memories in the market. It is made with advanced CMOS high-speed process technology and tailored for demanding higher-speed applications. The S25FS256SAGMFB001 provides a wide range of features, including four banks of program/erase, low power consumption, fast read/program/erase performance and secure performance.

Application Field of S25FS256SAGMFB001

The S25FS256SAGMFB001 is widely used in various markets, such as multimedia, consumer electronics, automotive, industrial, and medical. It is an ideal solution for applications such as automotive infotainment systems, digital cameras and camcorders, portable audio and video players, industrial equipment, medical devices, cell phones, handheld devices and much more.

The S25FS256SAGMFB001 is also used in a wide range of embedded system designs and is particularly well-suited for applications in small form factor devices where large amounts of code or data storage are required. Such applications include for instance industrial and consumer products, medical and automotive systems, audio and gaming devices, as well as network and server applications.

Working Principle of S25FS256SAGMFB001

The working principle of the S25FS256SAGMFB001 is based on the serial protocol, which allows the controller to communicate with the memory. The communication between the memory and the controller is done via the Serial Peripheral Interface (SPI). The SPI allows the controller to read, write and erase data in the memory.

The memory is organized in five successive addressable registers. The first register is the address (ADR) register, which is used to read and write instructions and data to the memory. The second register is the command (CMD) register, which is used to initiate read, write and erase operations. The third register is the status register, which is used to indicate the status of the memory. The fourth register is the data (DATA) register, which is used to store the data for read and write operations. The fifth and final register is the security register, which is used to set and reset the security settings.

The communication between the memory and the controller is done through the SPI line. The controller sends the commands and addresses to the memory through the SPI line. The memory then returns data, status or error messages on the SPI line. This process is repeated until all transactions have been completed. The S25FS256SAGMFB001 supports up to 4 banks of program/erase, with each bank containing 256Mbit of non-volatile memory.

Overall, the S25FS256SAGMFB001 is an ideal solution for applications requiring large amounts of non-volatile memory with low power consumption, fast access performance and secure performance. It is used in a wide range of markets and application fields, such as automotive, medical, industrial and consumer products, as well as portable and embedded systems. Its SPI interface also makes it compatible with a wide range of controllers.

The specific data is subject to PDF, and the above content is for reference