S25FS512SDSNFI011

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

When selecting storage components, engineers need to consider which memory device will be the most suitable for their application. The S25FS512SDSNFI011 is one such device, found within a wide array of embedded systems. This article looks at the S25FS512SDSNFI011 in terms of its application field and working principle, detailing the device’s features and benefits.

Application Field of S25FS512SDSNFI011

The S25FS512SDSNFI011 is an SPI Flash memory device, an off-the-shelf product with a wide application suitable for embedded systems. These products guarantee engineering processes, producing reliable and high-performance storage components. Due to the high performance and faster data transfer, the S25FS512SDSNFI011 is suitable for booting or power-on microcontrollers, executing extended-run firmware such as system applications, initializing and managing data storage, and updating or maintaining critical, secure information. The S25FS512SDSNFI011, due to its small size, is primarily utilized in hand-held, embedded or wearable systems. Typical uses include industrial, automotive, telecommunication and consumer products, primarily those reliant on ARM Cortex-M microcontrollers.

Working Principle of S25FS512SDSNFI011

The S25FS512SDSNFI011 utilizes a serial interface, with up to four I/O signal pins for data transfer. Each device contains an SPI bus master, using dual and quad-SPI instructions for fast operations including data transmission speed over 133MHz. As a Serial Flash memory, the device operates in a similar fashion to a traditional Flash drive, with data located in blocks at the chip level. A single command labeled as sector erase can clear all the data of one sector. Other commands like block erase and chip erase are similarly available.Due to the quad-SPI Interface, the S25FS512SDSNFI011 allows up to four times faster data transfer rate than that of the traditional SPI Interface. Furthermore, the device is Dual-I/O READ Enhanced up to 90Mhz. A typical read command on the S25FS512SDSNFI011 is 0xEC, which will read the device ID, followed by 0x9F, reading the Manufacturer ID.In terms of voltage requirements, the supply voltage for the S25FS512SDSNFI011 ranges from 1.65V to 1.95V. Temperatures can range between -40 to 85 degrees Celsius of operation, -55 to 105 degrees Celsius of storage, and 0 to +70 degrees Celsius of read and write.

Features and Benefits of S25FS512SDSNFI011

The S25FS512SDSNFI011 offers industry leading features in terms of data transfer speed, space, reliability and endurance. First, the device operates with a dual or quad read command set that increases data transfer speed. Up to four times faster than that of traditional SPI set, the faster data transfer can read and write high-bandwidth data types.Moreover, since the S25FS512SDSNFI011 utilizes high-density NAND Flash memory cells, despite its small size, it is still able to generate a maximum storage capacity of 64 megabits, allowing for more data to be stored than conventional SPI Flash memory devices. Security-wise, the S25FS512SDSNFI011 does not forget data stored in memory, even after power is removed. It also offers the ability to block write protect data, and is equipped with a serial protocol with four I/O pins to prevent tampering.Finally, the S25FS512SDSNFI011 is known to have an endurance cycle of up to 100,000 erase/write cycles, making it highly reliable.

Conclusion

The S25FS512SDSNFI011 operates as an SPI Flash memory device, used primarily in hand-held, embedded and wearable systems. The device offers a dual or quad read command which increases the data transfer speed. Furthermore, the device’s high-density NAND Flash memory cells with a capacities of 64Mb provides an advantage when dealing with high-bandwidth data types, whilst its security features guarantee data protection and its endurance cycle of up to 100,000 erase/write cycles makes for reliable usage in numerous applications.

The specific data is subject to PDF, and the above content is for reference