S2D-E3/5BT Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A single diode rectifier is a passive device that only allows current to flow in one direction. The S2D-E3/5BT is a single avalanche diode, typically used in rectifier circuits, usually as a stand-alone device. It is also used in other applications such as bridge rectifiers, junction field effect transistors (JFETs), and in voltage regulator circuits. It is an efficient and reliable electronic component.

The primary function of a diode is to convert alternating current (AC) power into direct current (DC) power. A diode rectifier is a type of circuit where a diode is used to convert AC current into DC current, by allowing current to flow in only one direction. The diode will act as an insulator against electricity flowing in the opposite direction. The S2D-E3/5BT is a single-phase, planar, avalanche diode used primarily in AC full-wave rectifier circuits. It has a surge current handling capability of up to 5.5A.

The S2D-E3/5BT is a general-purpose device with a peak forward voltage of 3V and a maximum reverse current of 5µA. It is a low-cost device which is suitable for a wide range of switching, full-wave rectification, and voltage-regulation applications. It has low on-state resistance, making it an ideal choice for power conversion applications. The device is also well suited to full-wave rectification circuits, where it can be used to create a full-wave rectified output voltage with minimal losses due to its low reverse-current and forward-voltage characteristics.

The primary application of the S2D-E3/5BT is as a stand-alone device in rectifier circuits. In these circuits, ac voltages are converted to dc voltages. A single diode rectifier, such as the S2D-E3/5BT, can be used to rectify an ac input voltage, while a bridge rectifier is used when multiple outputs are needed. The S2D-E3/5BT is also used in junction field effect transistors (JFETs) where it acts to enhance the device performance, by reducing the turn-on voltage and increasing the current handling capability.

In addition, the S2D-E3/5BT can be used in voltage regulator circuits. These circuits maintain a constant output voltage even when changes in the input voltage occur. The device exhibits very low forward voltage drop and low reverse-leakage current, which makes it suitable for use in voltage-regulation applications.

The working principle of the S2D-E3/5BT is simple. It consists of an anode, a cathode, and a junction between the two. When an AC voltage is applied to the anode, the current then flows mainly through the diode. The anode has a positive potential, while the cathode has a negative potential. The anode of the diode is connected to the positive terminal of the AC voltage source, and the cathode is connected to the negative terminal of the AC voltage source. When an AC voltage is applied, the diode will allow current to flow in one direction only. This is because the diode is forward-biased, and acts as an insulator against current flowing in the other direction. This is how the S2D-E3/5BT functions in AC full-wave rectifier circuit.

In conclusion, the S2D-E3/5BT single avalanche diode is an efficient and reliable electronic component. It can be used in rectification, switching, JFET, and voltage regulator circuits, but its primary application is in AC full-wave rectifier circuits. Its low on-state resistance and low reverse current are important for efficient power conversion. Finally, the working principle of the S2D-E3/5BT is simple and straightforward, as the diode only allows current to flow in one direction when an AC voltage is applied.

The specific data is subject to PDF, and the above content is for reference