S2G-13 Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A S2G-13 rectifier diode is most commonly used in full-wave rectification applications, such as power supplies, and for half-wave rectification, like radio amplifiers, oscillators, and other power equipment. It is most often seen in consumer electronics, such as TVs, computers, and other consumer electronics.

The S2G-13 rectifier diode is a silicon rectifier that functions as a high-frequency bridge rectifying diode. The diode has two terminals (anode and cathode) and two legs, or poles. When current is applied to the diode, it will allow current to flow in one direction only, effectively rectifying the current by acting as a selective switch.

When the anode of the diode is connected to a voltage source and the cathode is connected to a load, the diode will act as a normal forward-biasing diode, allowing current to flow from the anode to the cathode. When the anode is connected to the load and the cathode to a voltage source, the diode will act as a reverse-biasing diode, blocking current flow.

For full-wave rectification, the rectifier diode is used in conjunction with a center-tapped transformer. The transformer amplifies the AC voltage so that it is higher than the voltage of the load. The rectifier diode is then connected to the output of the transformer, providing full-wave rectification.

In full-wave rectification, the diode will block current from coming from the load, but will allow current from the transformer, thereby creating the required DC voltage. For half-wave rectification, the diode is connected to the output of the transformer, but with a single-phase, alternating voltage source. In this configuration, the diode will allow current to flow from the transformer to the load in one direction, and will block it from flowing in the opposite direction.

The S2G-13 rectifier diode is typically used in applications such as power supplies and inverters, full-wave or bridge rectification, and half-wave rectification. The diode has a low forward voltage drop, a high reverse voltage blocking capability, and is capable of dissipating large power in a very small size. The diode also has a relatively low switching time and can be used in a variety of temperature ranges.

In addition to its rectifier capabilities, the diode can also be used to perform a variety of other functions such as regulating voltage, controlling current flow, and switching frequency. The diode can also be used in television and audio circuits to prevent noise from reaching the output of the circuit. The S2G-13 rectifier diode is also widely used for protection applications such as over-voltage and over-current protection, reverse-EMF protection, and short-circuit protection.

The S2G-13 rectifier diode is a versatile device that can be used in a variety of electronic applications. Its low forward voltage drop, high reverse voltage blocking capability, and fast switching time make it an ideal choice for applications where reliable, high-performance rectification is required.

The specific data is subject to PDF, and the above content is for reference