Allicdata Part #: | S2G-E3/1GI-ND |
Manufacturer Part#: |
S2G-E3/1 |
Price: | $ 0.07 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | DIODE GEN PURP 400V 1.5A DO214AA |
More Detail: | Diode Standard 400V 1.5A Surface Mount DO-214AA (S... |
DataSheet: | S2G-E3/1 Datasheet/PDF |
Quantity: | 1000 |
6000 +: | $ 0.06219 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Diode Type: | Standard |
Voltage - DC Reverse (Vr) (Max): | 400V |
Current - Average Rectified (Io): | 1.5A |
Voltage - Forward (Vf) (Max) @ If: | 1.15V @ 1.5A |
Speed: | Standard Recovery >500ns, > 200mA (Io) |
Reverse Recovery Time (trr): | 2µs |
Current - Reverse Leakage @ Vr: | 1µA @ 400V |
Capacitance @ Vr, F: | 16pF @ 4V, 1MHz |
Mounting Type: | Surface Mount |
Package / Case: | DO-214AA, SMB |
Supplier Device Package: | DO-214AA (SMB) |
Operating Temperature - Junction: | -55°C ~ 150°C |
Base Part Number: | S2G |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Diodes - Rectifiers - Single
The S2G-E3/1 diode is a single-phase, full-wave rectifier and is used in a variety of applications. This diode can handle a wide range of frequencies and the current rating is determined by the size of the package. Commonly used in power supplies, this device is also suitable for high-current applications, such as automotive alternators.
A single-phase full-wave rectifier is a diode configuration used to rectify AC voltages into DC voltages. Such a device consists of two diodes connected in series, alternating on a single-phase supply. As the AC voltage alternates, the two diodes taking turns in conducting and blocking. Hence, in each half cycle, one of the diodes is forward biased while the other one is reverse biased. This causes the rectified voltage to have no zero-crossing points; the current flows in a single direction and is composed of the sum of two half-wave voltages in antiphase.
The advantage of a single-phase full-wave rectifier over other diode configurations is that it increases the efficiency in transferring power from the grid to an appliance. This type of rectifier is mainly used in power supplies to deliver regulated DC voltage with low ripple. The S2G-E3/1 is particularly suited for such applications due to its wide frequency range and high current rating.
To ensure that the S2G-E3/1 diode is correctly used, it is important to take into account the polarity of the device and its current capabilities. The diode has an anode terminal and a cathode terminal, which must be connected accordingly to obtain the required waveform. In addition, the maximum current rating of the S2G-E3/1 must not be exceeded; a printed circuit board must be designed in such a way so that a current loop is possible. This is to minimize the heat generated by the device and ensure the safety of the application.
The S2G-E3/1 diode is a single-phase full-wave rectifier suitable for a wide range of applications. It is easy to install and configure, making it a cost-effective device. The current rating and polarity of the device must be taken into consideration before its use, in order to guarantee the proper functioning of the application.
The specific data is subject to PDF, and the above content is for reference
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...