S2G-TP Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Single, or single-phase, rectification is one of the most common forms of power conversion. In this form of power conversion, an AC source is rectified into a DC voltage, by allowing only one-half of the AC source to pass. This AC source can range in frequency from 10 kHz to 50 kHz, and the rectified voltage can reach 400-1000 VDC.

Among the most widely used rectifiers for single-phase applications is the S2G-TP, which is a single-phase, full-wave thyristor rectifier that produces a rectified DC voltage. It can be used for both low voltage (< 500 VDC) and high voltage (> 1000 VDC) applications. This type of rectifier is especially popular for applications where the AC source frequency is around 25 kHz.

The S2G-TP rectifier consists of two parallel thyristors, or SCRs, connected in series to create a half-wave rectification effect. The two thyristors are connected in reverse so that when the AC source voltage reaches a peak voltage and begins to fall, the rightmost thyristor is activated, allowing current to flow through the rectifier.

When the voltage rises again, the leftmost thyristor is triggered and current is allowed to flow through the other direction. In this way, half-wave rectification is achieved, and the rectified DC voltage is obtained. Depending on the types of SCRs used and the values of critical triggering voltages, the amount of ripple in the output DC voltage can be further reduced.

The S2G-TP rectifier, due to its high efficiency and low cost, is widely used in consumer electronic devices, including managed network switches, data processing systems, and high-speed large scale integrated circuits. Additionally, it finds application in power supplies, HVAC controllers, power factor correction devices, and distributed power systems.

It is also commonly used in power conversion stages, both unidirectional and bidirectional, for off-grid solar photovoltaic systems, wind turbines, and electric vehicles. In these applications, the S2G-TP rectifier is used to convert the AC input into a DC output that is stepped up for further applications. Additionally, the S2G-TP rectifier is also used in medical imaging, motion control, and smart grid technologies.

The advantages of using an S2G-TP rectifier are significant, as it can provide a highly reliable, cost-effective solution for a variety of applications. Moreover, due to its high efficiency and low power consumption, it is an excellent choice for applications where minimizing energy consumption is crucial.

The specific data is subject to PDF, and the above content is for reference