S2S5FA0F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The S2S5FA0F is an optoisolator device from Sharp Corporation which uses triac and SCR output technology. It consists of an infrared LED and a photodetector, two optocouplers, and a triac and a SCR. The optocouplers allow the LED and photodetector to be isolated from the triac and SCR, which ensures reliable operation and improved data transmission accuracy. The LED will emit light when an electric current flows through it. The photodetector then detects this light and converts it into an electrical signal, which is then used to control the triac and SCR.

The S2S5FA0F is used in a variety of applications, especially in industrial settings. It has been used to control motors, pumps, valves, and lighting. It is also used to monitor and control power supplies and HVAC systems. It can be used to replace traditional contactors, such as relays, for improved performance and safety. The S2S5FA0F is used in telecommunications, automotive, and medical industries, as well as military applications.

The S2S5FA0F is a high-efficiency optoisolator which provides reliable and accurate signal transmission. It has an isolation rating of up to 5kV, which ensures reliable and accurate data transmission. It also has a 70mA operating current minimum and 3V dropout voltage. The device has a forward current transfer ratio (CTR) of 400-450%. This ensures high levels of signal conversion and transmission accuracy. Additionally, the device has a wide operation temperature range from -40°C to +85°C.

The S2S5FA0F has a wide operating voltage range of 4.5V to 32V DC. This allows the device to be used in a variety of applications, including low-voltage and medium-voltage applications. Additionally, the device is designed for use with mo logic voltage formats, including CMOS, TTL and open collector. It has a high speed switching response of 10kHz and a noise immunity of VDE0303/EN50082-1 through the LED.

The working principle of the S2S5FA0F is simple and straightforward. When an electric current is applied to the LED, it will emit light. This light will be detected by the photodetector, which then produces an electrical signal. This signal is used to control the triac and SCR, which in turn control the motor or other device connected to the device. The electrical signal may be a switching signal or a control signal, depending on the application.

The S2S5FA0F is a highly reliable optoisolator device which is used in a variety of applications. It has a reliable isolation rating and a wide operating voltage range. It is also designed to work with various logic voltage formats. This ensures reliable and accurate data transmission. Additionally, the device has a fast switching response and a noise immunity feature for improved performance.

The specific data is subject to PDF, and the above content is for reference