Allicdata Part #: | Z10061-ND |
Manufacturer Part#: |
S8M-CP04 |
Price: | $ 223.54 |
Product Category: | Industrial Controls |
Manufacturer: | Omron Automation and Safety |
Short Description: | PWR MULTICIRCUIT PROTECT |
More Detail: | N/A |
DataSheet: | S8M-CP04 Datasheet/PDF |
Quantity: | 1 |
1 +: | $ 203.21300 |
5 +: | $ 196.86200 |
10 +: | $ 190.51200 |
25 +: | $ 184.16200 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
S8M-CP04 is a three-phase over current protection relay that provides advanced protection for low, medium and high voltage power networks. The relay can also be used for other applications such as motor protection, transformer protection and generator protection. The relay has a wide voltage input range, adjustable trip settings, and is suitable for both alternating current (AC) and direct current (DC) applications. The S8M-CP04 provides fault detection, reclosing, and protection for electrical networks of all sizes and shapes.
S8M-CP04 is a low-cost, easy-to-use over current protection relay that offers sophisticated protection for power networks. The S8M-CP04 is designed to detect and clear faults quickly and effectively to avoid damage, improve reliability, and extend the life of electrical network equipment. The S8M-CP04 uses a series of relays, each with its own timer, to sense current and perform operations. The S8M-CP04 offers adjustable trip settings which allow operators to select the best tripping sequence and time delay for each individual application.
The primary purpose of S8M-CP04 is to detect and protect against over current conditions in electrical networks. An over current event is defined as any current exceeding the pre-selected trip setting set by the user. Once an over current is detected, the S8M-CP04 relay will trip and break the associated circuit. The S8M-CP04 is designed to detect both AC and DC currents, providing protection regardless of the type of current present in the circuit.
The S8M-CP04 can also be used to protect electrical networks against other types of faults, such as over voltage, short circuit, reverse power flow, and over temperature. When a fault is detected, the S8M-CP04 relay will isolate the affected circuit to prevent further damage. The S8M-CP04 can be used to protect motors, transformers, cables, and switchgear.
One of the most important functions of the S8M-CP04 is its ability to detect and clear system faults. The S8M-CP04 has the capability to detect the presence of a fault and clear the fault quickly to reduce the amount of damage and downtime. The S8M-CP04 can detect and clear single-phase and three-phase faults, as well as resistance, capacitive, inductive, open and short circuits.
In order to ensure a reliable protection against over current events, the S8M-CP04 has adjustable trip settings. These settings allow users to select the most suitable protection level, based on their individual needs. The adjustable settings also allow for different time delays, so that the circuit can be isolated before the fault becomes serious.
The S8M-CP04 is designed for use in areas where high levels of reliability are required. It is suitable for installation in industrial, commercial and residential applications. The S8M-CP04 is also simple to install and operate, providing maximum protection with minimal training and maintenance.
The specific data is subject to PDF, and the above content is for reference