SA2-6300-DLT-STD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters (GDT) are a type of surge protection device designed to reduce the effects of voltage surges on electrical circuits. They are commonly used in the automotive, industrial, and communications industries to protect against lightning, overvoltage, and other similar problems. The SA2-6300-DLT-STD arrester is a multi-stage, low capacitance arrester that is designed to provide excellent protection against long or multiple transient events.

The SA2-6300-DLT-STD arrester\'s primary application field is in high-reliability applications such as substations, control systems, power distribution systems, and transportation systems. In these applications, the arrester must be able to withstand extreme levels of voltage and current with minimal degradation. The SA2-6300-DLT-STD arrester is designed to do exactly this, with its multi-stage protection system providing high levels of protection against surges of up to 5,000 volts.

The core working principle of the SA2-6300-DLT-STD arrester is to provide surge protection by limiting the peak voltage applied to the protected equipment. This is done through a series of non-linear components, such as varistors, gas tubes, spark gaps, and capacitors. The varistors absorb most of the voltage surge, allowing smaller components such as gas tubes and spark gaps to absorb the remaining spike. Finally, the capacitors act as a dielectric buffer, short-circuiting the high-frequency components of the surge and limiting the voltage that reaches the protected equipment.

Under normal operating conditions, the SA2-6300-DLT-STD arrester is designed to present negligible impedance to the protected circuit. This allows the protected device to continue operating as usual while providing surge protection. When a surge is detected, the varistor absorbs most of the voltage spike, while the remaining surge is handled by the gas tube, spark gap, and capacitor components. This allows the SA2-6300-DLT-STD arrester to provide protection from both single-phase and three-phase operating conditions.

The SA2-6300-DLT-STD arrester is highly effective at absorbing and dispersing surges, allowing protected equipment to avoid damage from transients and overvoltage conditions. The arrester’s ability to absorb and disperse surges of up to 5,000 volts further makes it a good choice for high-reliability applications where equipment reliability is critical. In addition, the SA2-6300-DLT-STD arrester is rated for minimum arcing and. sparkover, making it an attractive choice in applications where arcs and sparks can cause significant damage.

In summary, the SA2-6300-DLT-STD arrester is designed to provide effective protection against static electricity, voltage surges, and overvoltage conditions. Its low capacitance and multi-stage protection system make it suitable for protecting high-reliability equipment such as control and power distribution systems. The arrester’s ability to provide protection from both single-phase and three-phase conditions makes it an attractive choice for applications where arcs and sparks can cause significant damage. In addition, the arrester’s high durability and reliable operation ensures long service life.

The specific data is subject to PDF, and the above content is for reference