SBC4-103-111

DC Resistance (DCR):	19.5 Ohm Max
Height - Seated (Max):	0.571" (14.50mm)
Size / Dimension:	0.354" Dia (9.00mm)
Package / Case:	Radial, Vertical Cylinder
Mounting Type:	Through Hole
Inductance Frequency - Test:	10kHz
Operating Temperature:	--
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	SBC
Shielding:	Unshielded
Current - Saturation:	140mA
Current Rating:	110mA
Tolerance:	±10%
Inductance:	10mH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

Fixed inductors are devices that provide an inductive reactance for an electrical circuit. They can be a passive, two-terminal electronic component that stores energy in its magnetic field when connected to a current. The SBC4-103-111 is a classic example of a fixed inductor, used in a variety of applications.The SBC4-103-111 is a non-polarized radial-style surface-mount chip inductor with a value of 1000nH (0.001 µH). It has a rated current of 0.5A and an inductance of ±4%. It is also designed with a 3mOhm ± 11% DCR (Direct Current Resistance). The SBC4-103-111 is typically used in switching power supplies, hammering protection and filtering applications. It is also used in tension controllers, audio converters, decoders and other electrical circuits. In terms of its working principle, the SBC4-103-111 consists of either a coil of wire on a core – usually iron – or a large part of wire without any core. When an electrical current passes through the wire, it produces a magnetic field. This causes the inductor to oppose, or resist, any changes in current. The inductor’s job is to retain a steady current in a circuit for a period of time. The primary application field of the SBC4-103-111 is RF filtering, also known as RF bandpass filtering. This type of filtering, powered by the SBC4-103-111 active inductor, is used to isolate and enable signals to pass across a band, from one side to the other with minimum interference. Other potential applications include power amplifier biasing circuits, voltage regulator circuits, and electronic tone control circuits. Moreover, the SBC4-103-111 can also be used in buck-boost converter circuits, current-mode switching regulator circuits, and ripple filter circuits. It can also be used for noise suppression in RF amplifier circuits, filter feedback circuitry in electronic power supplies, and high-frequency and harmonic-rejection circuits. In terms of its operation frequency range, the SBC4-103-111 works better at frequencies in the 10MHz to 1MHz range. It is however also capable of operating at higher frequencies, up to 1GHz. The actual performance of the inductor may vary across different frequencies due to the varying magnetic fields.Finally, the SBC4-103-111 is UL rated CSA/E17719 and meets the requirements defined in MIL-STD-1284. The SBC4-103 is available in a variety of packages, with different inductance values, allowing it to be used in a variety of applications. The SBC4-103-111 is a popular choice of inductor for a wide range of applications due to its low cost, small size, and the power it can provide. Its inductance value, rated current, and direct current resistance are all well-suited for a variety of applications. The SBC4-103-111 is a powerful and reliable fixed inductor that is effective and efficient in the tasks it is designed for.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description