SC1206-1R0

DC Resistance (DCR):	364 mOhm Max
Height - Seated (Max):	0.079" (2.00mm)
Size / Dimension:	0.138" L x 0.071" W (3.50mm x 1.80mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	1MHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	SC1206
Shielding:	Unshielded
Current - Saturation:	510mA
Current Rating:	780mA
Tolerance:	±20%
Inductance:	1µH
Material - Core:	--
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors: SC1206-1R0 Application Field and Working PrincipleInductors are electronic components designed to store and regulate current in a circuit. A fixed inductor, in particular, is a type of Inductor which is designed with a specific inductance value and unable to adjust. Commonly used in frequency-dependent circuits, these versatile components regulate frequency and voltage, convert alternating current to direct current, filter noise and distortion, regulate amplification, and even perform impedance matching. SC1206-1R0 is a special type of fixed inductor, and its application field and working principle unlocks a wide range of exciting possibilities. In general, inductors consist of a coil of winding, usually made from insulated copper wire, wound around a core. This core can be made up of materials such as iron, steel, ferrite, or air. The core is also referred to as the "bobbin" and the copper coil is called the "winding". When current passes through the inductor, it creates a magnetic field around it, which can be used to regulate voltage and frequency in a circuit. The SC1206-1R0 inductor is designed for applications in high-frequency circuits, such as radio receivers and transmitters, switching power supplies, EMI filters, amplifiers, and antennas. It has a particularly low DC resistance, which makes it ideal for integrating into circuits that require good signal-to-noise ratio requirements and lower-distortion output. It also has a low self-inductance which means that the distortions caused by self-induced inductance are minimized. The low self-inductance of the SC1206-1R0 also provides it with high frequency stability, making it an excellent choice for high-frequency circuits such as oscillators and frequency-sensitive components. It also has a better heat dissipation capability, allowing it to operate in even the most demanding thermal environments. The SC1206-1R0 inductor can also be mounted in tight spaces due to its low-profile construction. The combination of its performance characteristics and design, make it ideal for use in any circuit where high-frequency stability, low-noise capability, low-distortion output, and signal-to-noise ratio requirements are critical. The SC1206-1R0 inductor typically consists of a silvery-grey resin, usually held together by three supports. There are two terminals extending from the coil, known as the “hot” and “cold” terminals. When current passes through the inductor, the coil creates an electromagnetic field. This field helps to regulate the flow of current, including voltage and frequency. As the current increases, the resistance of the inductor also increases, thus making it difficult for the current to increase. This is referred to as inductive reactance which helps regulate the current by limiting the amount that can pass through the inductor. This is very useful for high-frequency circuit designs, as it helps dampen the effects of higher frequency signals. The SC1206-1R0 inductor also provides a high common mode impedance, which helps to reduce the effect of higher-frequency signals. It also provides an excellent balance between self-inductance and capacitance, ensuring good signal integrity and signal-to-noise ratio (SNR) in the circuit. Overall, the SC1206-1R0 fixed inductor is an excellent choice for high-frequency circuit designs, as it offers a number of useful performance characteristics including low-profile construction, low-resistance, low-inductance, high common mode impedance, low-noise capability, and low-distortion output. It also has a good heat dissipation capability, allowing it to perform reliably in even the most demanding thermal environments. With its wide range of capabilities and features, the SC1206-1R0 fixed inductor provides an ideal solution for circuits that need reliable and efficient performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description