SC189ASKTRT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SC189ASKTRT is an integrated power management integrated circuit (PMIC) specifically designed for DC-DC switching regulator applications. It is primarily used to step-down and regulate the power supply voltage within high-end computing and embedded system applications. An internal 28nm process is used to fabricate the device’s multiple power switches, which are evolved from those of previous generations. It is made of gallium nitride (GaN), allowing it to operate in a high efficiency range of up to 99.5%.

The SC189ASKTRT comprises a high-current, high-frequency MOSFET driver and power supply control circuit used to control the multiple high-voltage MOSFETs. It features a wide input voltage range of 4 to 40 volts, with a maximum output current of 3.2 A and a switching frequency of up to 4MHz. The on-chip voltage regulation loop (VRL) allows for fast transient response and a high switching frequency. It also has an internal error amplifier and a low-voltage DC detect circuit to precisely lower the voltage applied to the load.

The chip provides a broad range of protection features and is designed to operate in a wide range of temperatures and power conditions. It has built-in over-voltage protection (OVP), over-temperature protection (OTP), over-current protection (OCP) and under-voltage lockout (UVLO) circuitry. Additionally, the chip also has an output voltage monitor (OVM) and an internal clock monitor (ICM) to detect and report periodic output voltage peaks. This allows it to detect if the load has exceeded the output’s current limits.

The SC189ASKTRT can be used in various applications, including DC-DC switching regulators, power supplies, DC-DC converters and portable electronics. It can also be used with other power management ICs, such as voltage regulators and power amplifiers, to provide a comprehensive power management solution for the system. The device’s wide input voltage range, high switching frequency and protection features make it an ideal choice for a variety of applications.

The working principle of the SC189ASKTRT is based on the idea of controlling the switching of the gate of the MOSFET connected to the main power supply. The power supply input is used as the first control signal; it is connected to the VREF pin of the device. When the VREF signal is low, it activates the MOSFET gate, resulting in the output voltage going up. When the VREF signal is high, it deactivates the gate, resulting in the output voltage dropping. The signal to control the output voltage is taken from the error amplifier’s output and is used to adjust the gate voltage accordingly.

To further adjust the output voltage, the IC has an additional pin, referred to as the feedback pin. This pin senses the output voltage and provides an output signal to the error amplifier. This signal is compared to the voltage of the VREF pin to control the operation of the MOSFET. If the output voltage is higher than the VREF voltage, the error amplifier will reduce the gate voltage and the output voltage will drop until it reaches the VREF voltage. Similarly, if the output voltage is lower than the VREF voltage, the error amplifier will increase the gate voltage, resulting in the output voltage increasing.

The SC189ASKTRT also has a slew rate control pin, referred to as the INTVCC pin, which is used to limit the peak current and avoid detrimental overshoot. This can be used to further fine tune the output voltage and ensure that it does not exceed the maximum rated voltage. Additionally, the device has a power-on reset pin, referred to as the RST pin, which is used to reset the device’s internal circuitry once the supply voltage has dropped below the rated minimum of 4V. This ensures that the device is in a safe power-on state at all times.

The SC189ASKTRT is an efficient and reliable device that can be used in a wide range of power management applications. With its wide range of features and protections, it can be used to easily step-down and regulate the power supply voltage within high-end computing and embedded system applications. Its high-frequency, high-current driver and integrated protection circuitry make it an ideal choice for a variety of DC-DC switching regulator applications.

The specific data is subject to PDF, and the above content is for reference