SC3326F-6R8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are passive two-terminal electronic components that consist of a wire wound around a core or Permalloy magnetic material, or an air core. An inductor stores energy in a magnetic field when an electric current passes through it. The SC3326F-6R8 fixed inductor is a low profile, small chip-type inductor.

The SC3326F-6R8 is a small chip-type fixed inductor with a low profile of 1.6mm and a wide range of inductance values. It has good high-frequency characteristics and can be used in a wide range of applications such as frequency tuning, decoupling, filtering, and matching circuits. It is designed to be surface mounted on the printed circuit board and is acost effective solution for a variety of high-frequency applications.

One of the applications of the SC3326F-6R8 is decoupling capacitors, which are used to decrease instantaneous current draw and improve Power Supplies. The inductor is used to block any high-frequency signals in the Power Supply line. By blocking the high-frequency signals, the Power Supply becomes more efficient and the power output is improved.

The SC3326F-6R8 is also used in high-frequency filtering circuits, where the inductor can act as a low pass filter. This is because at high frequencies, the inductor acts as an open circuit, whereas at low frequencies, the length of the wire wound around the core and the number of turns determines the impedance of the inductor. When used in a filtering circuit, the inductor is used In combination with a capacitor to block any high-frequency signals that can cause interference.

The SC3326F-6R8 is also used in matching circuits. A matching circuit is used to ensure that the impedance of the input and output of the circuit are equal. This is important as it ensures that all the power from the input is transferred to the load without any being reflected back. The inductor in the matching circuit acts as a load, and the number of turns and the air gaps act as a cushion to absorb the reflected power.

The SC3326F-6R8 is a fixed inductor designed for use in high-frequency applications. It has a low profile and a wide range of inductance values, making it a cost effective solution for a variety of applications. It can be used in decoupling, filtering and matching circuits, and it is designed to be surface mounted on the printed circuit board.

The specific data is subject to PDF, and the above content is for reference