SC3BA10FF

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Type:	Three Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	100V
Current - Average Rectified (Io):	6A
Voltage - Forward (Vf) (Max) @ If:	970mV @ 5A
Current - Reverse Leakage @ Vr:	30µA @ 100V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	QC Terminal
Package / Case:	5-Rectangle
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to SC3BA10FF Bridge Rectifiers

Bridge rectifiers are diodes which are configured in a circuit to convert AC input voltages of either polarity into a single DC output voltage. The SC3BA10FF bridge rectifier is a type of bridge rectifier which is designed to handle up to 1,000 volts of alternating current and can provide up to 1 amp of current. It is commonly used for applications such as motor and lighting controls, AC-DC power supplies, and power controllers.

What is the SC3BA10FF Bridge Rectifier?

The SC3BA10FF bridge rectifier is made up of four individual diodes, arranged in a bridge circuit configuration, and encapsulated in a UL 94-V0 rated plastic shell. Each diode is rated at 1000 volts and 3 amps, and has a reverse voltage of one-half of the forward voltage rating. The body dimensions of the SC3BA10FF are 25.4mm x 17.7mm x 10.4mm.

SC3BA10FF Bridge Rectifier Applications

The SC3BA10FF bridge rectifier can be used in a variety of applications, including:- Switching and motor controls - AC-DC power supplies and power controllers - Emergency stops - Lighting control systems - Low voltage DC power supplies

SC3BA10FF Bridge Rectifier Working Principle

The working principle of a bridge rectifier circuit is based on the concept of negative feedback. In order for current to flow through a diode, the voltage applied to it must be greater than its forward voltage. When the voltage across the diode exceeds its forward voltage, the diode turns on and conducts current. Because the diodes in a bridge rectifier circuit are arranged in a bridge configuration, they will conduct current only when the applied voltage exceeds the forward voltage of the diode.In a full-wave rectifier circuit, the AC input voltage is applied to the bridge circuit and each diode will alternately turn on and off. When a diode turns on, the voltage across it will be greater than its forward voltage, allowing current to flow. When the diode turns off, no current will flow. This process is repeated for each AC cycle, resulting in a pulsed DC output. The magnitude of the output voltage will depend on the magnitude of the applied voltage and the properties of the diodes.

Conclusion

The SC3BA10FF bridge rectifier is a widely used diode bridge circuit. It has a high voltage and current rating, making it suitable for a range of applications, including motor and lighting controls, AC-DC power supplies, and power controllers. In addition, its working principle is based on negative feedback and the use of full-wave rectifier circuits, which allow for the conversion of AC voltages of either polarity into a single DC output voltage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description