SC52-100 Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electrical components comprised of two or more metal coils that store energy or send electrical current. As one of the basic circuit components, inductors are widely used, both within logic circuits and on electronic assemblies. The SC52-100 is one such inductor. This article will discuss the application field and working principle of the SC52-100.

Application field

The SC52-100 is a fixed inductor that primarily provides electrical current in circuits where power is low and the current must be weak. Typical applications include:

• Cell phones
• PDAs
• Cameras
• Handheld game consoles
• Battery chargers
• LCD displays

The SC52-100 has a wide range of inductance ratings from 10 to 330 uH, and is also available in various package sizes. This flexibility makes it well suited for use in a variety of circuits.

Working principle

The SC52-100 fixed inductor works on the principle of inductance. Inductance is the process of magnetic energy being stored in a coil. When a current is passed through the coil it creates a magnetic field that produces an opposing force. This force prevents any further increase in the current, and induces a voltage in the coil proportional to the rate of change of the current. In other words, the current can be varied to keep the voltage at a certain level.

The SC52-100 contains two insulated coils of copper wire, separated by an insulating material, with each coil connected to a separate set of terminals. A ground wire is also connected to one of the terminals in order to complete the circuit. When current is passed through the coil, a magnetic field is created which induces a voltage across the terminals. This voltage can be adjusted by varying the current.

As with any inductor, the SC52-100 needs to be securely mounted on a printed circuit board in order to ensure it is properly fixed to the component properly. Otherwise, it can lead to unwanted buzzing, vibration or heat generation. In most applications, the inductor is mounted on the PCB using either soldering or adhesive.

Conclusion

The SC52-100 is a fixed inductor primarily used in circuits requiring moderate electrical currents. It is able to produce an adjustable voltage proportional to the rate of change of the current, and is available in a wide range of inductance ratings and package sizes. It is important to ensure the inductor is mounted correctly onto the PCB in order to avoid unwanted vibration or heat generation.

The specific data is subject to PDF, and the above content is for reference