SCBA2F

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	200V
Current - Average Rectified (Io):	5A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 3A
Current - Reverse Leakage @ Vr:	2µA @ 200V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	QC Terminal
Package / Case:	4-Square
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
SCBA2F (Surface-mounted Controlled Break-Above-2-Forward) is a kind of diodes that bridges between rectifiers and control circuits. It is a special type of Bridge Rectifier that is mainly used for AC power distribution in modern electronics. It is a compact, cost-effective option for automated switching applications. The SCBA2F has two distinct operation modes: a high-voltage mode and a low-voltage mode. Basic of SCBA2F
At its core, an SCBA2F is a two-way, two-pin interface consisting of two diodes and two forward-biased resistors. The first diode is at the top and the second diode is at the bottom. The first and second resistor is respectively connected to each diode. The main component of the SCBA2F is a control circuit that is connected to the two pins of the two-way interface. This circuit is responsible for sending signals to the two diodes in order to activate either the high-voltage or the low-voltage mode. This control circuit may consist of a digital or analog voltage, or a logic circuit such as a Schmitt Trigger. Application Areas
SCBA2F is a highly reliable solution for rectifying AC power from the mains or other utilities. It is used in a wide range of electrical devices, ranging from automotive starter motor systems to consumer electronics devices. The SCBA2F is also used in a variety of industrial applications, including rectified power distribution, UPS systems, and standalone solar and wind power systems, as well as in more sophisticated applications such as electric vehicle charging and renewable energy systems. Working Principle
The SCBA2F is designed to automatically switch between two modes of operation: high-voltage and low-voltage. When the voltage is low, typically below 4 volts, the first diode is on (this is considered the low-voltage mode). When the voltage is high, the second diode is on (this is considered the high-voltage mode). The position of the two diodes determines the current flow. When the voltage is low, the SCBA2F diodes allow current to flow through the two resistors. This current is then used to activate the SCBA2F control circuit. Depending on the control circuit output, the SCBA2F will switch to either the high-voltage or low-voltage mode. When the voltage is high, the SCBA2F diodes are impedance mode and not allow current to flow. Conclusion
The SCBA2F is a versatile, cost-effective solution for AC power distribution. It is a compact and reliable bridge rectifier that can automatically detect and switch between high-voltage and low-voltage modes. Its flexibility allows it to be used in a variety of applications, ranging from automotive and consumer electronics to industrial and renewable energy systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description