SCBR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SCBR2 is a single-phase, high power output, bridge rectifier. It is designed to deliver a full-wave rectified voltage from an AC power source. It has a maximum average forward rectified current rating of 16 amperes and a peak reverse voltage rating of 400 volts. The SCBR2 is an extremely popular device due to its simple design and efficiency. As a bridge rectifier, it is relatively easy to construct and operate with limited attention and cost. With a bridge rectifier, no external components are required, which is a major advantage.

Bridge rectifiers provide a full-wave rectification of AC power sources by using four diodes connected in a bridge configuration, as shown in Figure 1. The four diodes are arranged such that the AC power supply is applied across two of the, which will form a bridge circuit. The two external connections to the bridge circuit are called the Line 1 and Line 2. This bridge configuration allows both positive and negative half cycles of the AC power source to be rectified by two opposing diodes within the bridge.

The diodes are arranged such that when the applied AC voltage is positive, diodes on Line 1 and Line 2 will be forward-biased, while diodes on Line 2 and Line 1 will be reverse-biased. The forward-biased diodes will conduct current, while the reverse-biased diodes will block current. The current then passes through the bridge and is referred to as the forward current. During the negative half cycle of the AC power source, the same process occurs but with Line 1 and Line 2 reversed. This allows the bridge rectifier to provide a full-wave rectified output.

The SCBR2 is designed specifically as a high power output bridge rectifier with a maximum average forward rectified current rating of 16 amps. It has a peak reverse voltage rating of 400 volts, which means it will block higher voltages that may be present in some AC power sources. This allows the SCBR2 to be used in many industrial and commercial applications. It is also designed to have low EMI noise and high input surge current capability.

The SCBR2 is commonly used in power supplies, solar inverters, audio amplifiers, and RF applications. It can be used to provide DC power to rectify and smooth the output of an AC power source. It is also used in battery chargers to convert AC power to charge batteries. In addition, it is often used in applications where rectified energy is stored in a capacitor or inductor.

The SCBR2 is an economical and efficient bridge rectifier that can be used in a wide range of applications. Its simple construction and high power output make it an ideal choice for applications requiring a full-wave rectified voltage from an AC power source. The device is also designed to have low EMI noise and high input surge current capability, which makes it suitable for a variety of industrial and commercial applications.

The specific data is subject to PDF, and the above content is for reference