SCH750-6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminals - Wire Splice Connectors

The SCH750-6 Wire Splice Connector is a one-piece self-stripping termination device with a grooved stainless nail to secure the connector in place. It is designed for easy installation and provides superior electrical performance to the wire. The ideal application of the SCH750-6 Wire Splice Connector is for splicing up to three wires in a single run while providing a lubricated seal. This connector is an incomparable product of its kind, delivering outstanding performance in moist and corrosive environments.

The SCH750-6 Wire Splice Connector is available in a variety of sizes. Each size of the SCH750-6 is identified by its color. The size of the SCH750-6 connector can range from 5 to 22 AWG (American Wire Gauge) with the corresponding lengths ranging from 0.225” to 1.50”. The color code of the SCH750-6 connector is as follows:

• Size 5 - Red
• Size 6 - Blue
• Size 8 - Green
• Size 10 - Yellow
• Size 12 - White
• Size 14 - Brown
• Size 16 - Grey
• Size 18 - Violet
• Size 20 - Orange
• Size 22 - Tan

The SCH750-6 is made from a silver plated copper alloy containing approximately 95% copper which helps it pass electrical current better and longer than other copper connectors. Additionally, the silver plating gives the connector a longer shelf-life and corrodes less quickly than other connectors. The SCH750-6 Wire Splice Connector is also designed with a specialized grooved or knurled stainless nail which allows for greater retention of the connector when applied. The nail is additionally designed with four groves for easy gripping and improved performance for many different applications.

The SCH750-6 Wire Splice Connector is a UL Listed/CSA Certified and meets AMS-DTL-23053/5 specs as well as MIL-DTL-23053/5 specs. It is also QPL (Qualified Products List) approved making it a terrific waterproof connection for many different industrial applications. It is appropriate for use in many locations including the outdoors with wet and exposed conditions where temperature extremes occur. The SCH750-6 Wire Splice Connector is an industry standard connector and rated to 600 Volts and 190°C.

The SCH750-6 is extremely easy to install and requires no extra tools. The user simply needs to strip and place the wire into the SCH750-6 connector and then push it down over the wire and then ensure that it is locking in place with the stainless steel nail at the top. To further secure the SCH750-6 connector, the user can twist the locking nut the end which will tighten the connection even more. It is recommended that gloves be worn when installing the SCH750-6 Wire Splice Connector to avoid contact with sharp edges or corners. Additionally, the SCH750-6 should not be used in applications where greater than 600 volts is present.

The SCH750-6 Wire Splice Connector is an ideal solution for anyone needing a secure waterproof connection for two or more wires in a single run. It is easy to install with only basic tools and does not require any solder or special crimping tools. The SCH750-6 Wire Splice Connector is appropriate for a wide range of applications that require secure waterproof connections.

The specific data is subject to PDF, and the above content is for reference