SCI-1020-000 Allicdata Electronics
Allicdata Part #:

1171-1177-ND

Manufacturer Part#:

SCI-1020-000

Price: $ 0.00
Product Category:

Filters

Manufacturer: API Technologies Corp
Short Description: FILTER LC 1.4UF CHASSIS
More Detail: LC EMI Filter 2nd Order Low Pass 1 Channel C = 1.4...
DataSheet: SCI-1020-000 datasheetSCI-1020-000 Datasheet/PDF
Quantity: 1000
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Current: 15A
Height: --
Size / Dimension: 0.375" Dia x 0.357" L (9.52mm x 9.07mm)
Package / Case: Axial, Bushing - 2 Solder Eyelets
Mounting Type: Chassis Mount
Voltage - Rated: 50V
Applications: Microwave
Operating Temperature: -55°C ~ 125°C
ESD Protection: No
Values: C = 1.4µF
Series: --
Resistance - Channel (Ohms): 0.003
Attenuation Value: 70dB @ 100MHz ~ 1GHz
Center / Cutoff Frequency: --
Number of Channels: 1
Technology: LC
Filter Order: 2nd
Type: Low Pass
Part Status: Discontinued at Digi-Key
Packaging: Bulk 
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI filters are designed to attenuate or reduce electrical interference that can interfere with the operation of electrical or electronic systems. The SCI-1020-000 filter is a selectable, dual-banked, multi-mode, combined capacitor and inductor unit designed to attenuate high frequency electric and magnetic fields. The filter is designed for use with aircraft, aerospace, automotive, and industrial applications.

In these types of applications, EMI/RFI filters work to block the transmission of electromagnetic waves, interference that can interrupt operations. Typically, these filters are installed on the transmission line between the source of the interference and the sensitive electronic equipment. The SCI-1020-000 allows for multiple configurations of capacitors and inductors, which allow for different levels of operation and frequency response.

The SCI-1020-000 filter employs a hybrid technology involving multiple components working together in order to provide the most efficient system for attenuating interference. First, a capacitor is used to reduce the high frequency electric and magnetic fields. The capacitor then acts as a frequency-dependent load, converting the incoming interference signal into electrical current. This conversion results in a decrease in the amplitude of the signal, thus reducing the interference.

The filter also incorporates inductors, which further reduce both electric and magnetic fields. This type of filter will operate over a wide frequency range between 1MHz and 30MHz. Inductors act on both electric and magnetic fields in different ways, either by inductively coupling interference to ground, or by reducing the total field strength when interference is encountered. This type of filter is often used in locations where high levels of interference, such as those caused by aircraft, vehicles, or industrial equipment, are present.

The SCI-1020-000 filter may be used in industrial applications, as well in aircraft or automotive applications. This filter may be used to reduce the effects of electric and magnetic interference on sensitive electronic equipment, such as navigational or communications systems, as well as other applications requiring attenuation of electromagnetic energy. Additionally, the SCI-1020-000 filter may also be used as protection against EMI/RFI sources in applications where the total field strength must be maintained within a certain range, such as in military systems or sensitive areas.

To further eliminate residual interference, the SCI-1020-000 also includes stray capacitance filters. These components reduce the total capacitance of the system by absorbing stray capacitance in the environment which can contribute to errors in the system at high frequencies. By using a combination of the different components, the filter can provide a high degree of attenuation. Finally, the dual-banked design allows for either single or dual function attenuation depending on the application.

The SCI-1020-000 filter provides an effective solution to reducing or eliminating interference in applications where electromagnetic interference is present. This filter employs multiple components, including capacitors and inductors, to neutralize both electric and magnetic fields. By incorporating stray capacitance filters, the filter can also provide further protection. Overall, this type of filter is suitable for many different types of applications, making it a versatile and reliable choice to protect against interference.

The specific data is subject to PDF, and the above content is for reference

Latest Products
NFM21HC101U1H3D

FILTER LC HIGH FREQ 100PF 0805LC (T-Type...

NFM21HC101U1H3D Allicdata Electronics
CM1622-08DE

FILTER RC(PI) 100 OHM/12.5PF SMDRC (Pi) ...

CM1622-08DE Allicdata Electronics
M15733/33-0002

FILTER LC(PI) 1750PF CUSTOMLC (Pi) EMI F...

M15733/33-0002 Allicdata Electronics
4700-056M

FILTER LC(PI) 0.1UH/5000PF SMDLC (Pi) EM...

4700-056M Allicdata Electronics
MEA2010LC220

FILTER LC 22PF 210MHZ SMDLC EMI Filter 2...

MEA2010LC220 Allicdata Electronics
AOZ8175DI

FILTER RC(PI) 100 OHM/8PF SMDRC (Pi) EMI...

AOZ8175DI Allicdata Electronics