Allicdata Part #: | 1171-1178-ND |
Manufacturer Part#: |
SCI-3313-000 |
Price: | $ 0.00 |
Product Category: | Filters |
Manufacturer: | API Technologies Corp |
Short Description: | FILTER LC(PI) 0.1UF |
More Detail: | LC (Pi) EMI Filter 3rd Order Low Pass 1 Channel C ... |
DataSheet: | SCI-3313-000 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Resistance - Channel (Ohms): | 0.01 |
Size / Dimension: | 0.187" Dia x 0.468" L (4.75mm x 11.89mm) |
Package / Case: | Axial, Bushing, 1 Turret Lead |
Voltage - Rated: | 100V |
Applications: | Microwave |
Operating Temperature: | -55°C ~ 125°C |
ESD Protection: | No |
Values: | C = 0.1µF |
Current: | 10A |
Series: | -- |
Attenuation Value: | 70dB @ 100MHz ~ 10GHz |
Center / Cutoff Frequency: | -- |
Number of Channels: | 1 |
Technology: | LC (Pi) |
Filter Order: | 3rd |
Type: | Low Pass |
Part Status: | Discontinued at Digi-Key |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Electromagnetic interference (EMI) and radio frequency interference (RFI) are becoming increasingly problematic in modern electronics. The use of EMI/RFI filters can help to reduce problems caused by EMI/RFI. In this article, we will discuss the application field and working principle of the SCI-3313-000 filter, which is an EMI/RFI filter.
The SCI-3313-000 filter is designed for use in high-speed digital and power applications and is well suited to a wide range of industries, from aerospace to medical. The filter is used to reduce EMI/RFI both radiated and conducted, helping to protect sensitive components or systems. It is also well suited to a variety of applications where high power levels are required, such as electric vehicle chargers.
The SCI-3313-000 filter\'s working principle is based on the use of inductors and capacitors (known as an LC, or inductor-capacitor, network), which are connected in various ways to form the filter. The inductors and capacitors act as barriers between the devices on either side of them, blocking out interference while allowing the desired signal to pass through. In order to ensure that the device functions properly, the LC network must be implemented correctly.
The first step in the implementation of the LC network is to select suitable components for the filter. The components should offer high levels of performance, with low insertion loss, low test sensitization and low inductance. Additionally, the components should be able to withstand the operating conditions (temperature and voltage rating, etc.) of the application.
Once the components have been selected, they must be connected in the correct configuration and tested for performance, using an appropriate measurement instrument such as a vector network analyzer. In the case of the SCI-3313-000 filter, the components are typically connected in an RC (resistor-capacitor) network configuration, allowing the filter to operate over a wide band of frequencies. If the filter is not functioning properly, the configuration may need to be adjusted.
Once the components are connected and the filter is tested, the device should be installed in its intended location. In the case of the SCI-3313-000 filter, the device should be securely mounted in a suitable enclosure. The enclosure should be able to provide adequate protection from vibration, temperature extremes, and dust or other contaminants.
The SCI-3313-000 filter can be used in a variety of applications, from electric power systems to medical electronics. The filter will reduce the effects of EMI and RFI on sensitive components, helping to ensure that the components and the system as a whole are functioning optimally. Its use can also help to reduce the amount of maintenance required on the equipment, allowing it to be used safely and reliably for longer periods of time.
In conclusion, the SCI-3313-000 filter is an effective solution for providing protection from EMI/RFI. It uses an LC network to reduce interference levels without affecting the desired signal. The filter is well suited to a variety of applications, and is easy to implement and install. Finally, the filter can reduce the amount of maintenance required on the equipment, allowing it to be in use for longer periods of time.
The specific data is subject to PDF, and the above content is for reference
FILTER LC HIGH FREQ 100PF 0805LC (T-Type...
FILTER RC(PI) 100 OHM/12.5PF SMDRC (Pi) ...
FILTER LC(PI) 1750PF CUSTOMLC (Pi) EMI F...
FILTER LC(PI) 0.1UH/5000PF SMDLC (Pi) EM...
FILTER LC 22PF 210MHZ SMDLC EMI Filter 2...
FILTER RC(PI) 100 OHM/8PF SMDRC (Pi) EMI...