SCI-3323-000

Current:	10A
Height:	--
Size / Dimension:	0.187" Dia x 0.468" L (4.75mm x 11.89mm)
Package / Case:	Axial, Bushing, 1 Turret Lead
Mounting Type:	Chassis Mount
Voltage - Rated:	200V
Applications:	Microwave
Operating Temperature:	-55°C ~ 125°C
ESD Protection:	No
Values:	C = 0.012µF
Series:	--
Resistance - Channel (Ohms):	0.01
Attenuation Value:	70dB @ 100MHz ~ 10GHz
Center / Cutoff Frequency:	--
Number of Channels:	1
Technology:	LC (Pi)
Filter Order:	3rd
Type:	Low Pass
Part Status:	Discontinued at Digi-Key
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI Filters (LC, RC Networks): SCI-3323-000 Application Field and Working PrincipleThe application field of the SCI-3323-000 is a specialized form of EMI/RFI filters, known as LC (inductors and capacitors) and RC (resistors and capacitors) networks. They are used to reduce EMI (electromagnetic interference) and RFI (radio frequency interference) of digital and/or analog signals transmitted through the air. The SCI-3323-000 EMI/RFI filters also provide protection against potential damage caused by power fluctuations or sudden voltage increases.It can be used in various applications, such as automotive, consumer electronics, medical equipment, and industrial systems. In addition, these filters are ideal for use in environments where noise and other foreign signal are likely to be present, such as in an automotive test lab or an industrial facility.The working principle of the SCI-3323-000 EMI/RFI filter is based on the basic principles of electrical engineering. Its aim is to attenuate, or reduce, the EMI/RFI of a signal. This is done by combining an inductor and a capacitor, along with additional components such as resistors and capacitors, to form an LC or RC filter. This filter acts as a low-pass filter, meaning that it attenuates, or reduces, higher frequencies while passing through lower frequencies.The components for the SCI-3323-000 filter are designed to absorb and dissipate the EMI/RFI energy that is present in the signal. This is done by creating an electric field that opposes the signal. The components also act as impedance matching elements, which limits the amount of signal that “reflects” back into the circuit. As a result, the EMI/RFI energy is absorbed and dissipated, leaving the signal with a lower EMI/RFI effect.One of the benefits of the SCI-3323-000 EMI/RFI filter is that it is designed to be extremely easy to install. This makes it a great choice for applications where quick installation is desired or necessary. Furthermore, due to its small size, it can fit in a variety of locations, including systems where space is limited.Although the SCI-3323-000 EMI/RFI filter is an effective and highly efficient solution, it does come with its limitations. If the EMI/RFI noise levels are too high, or if the frequencies of the noise are too close to that of the signal, then the filter may be ineffective. Additionally, if the signal contains transient noise, then it may also be inadequate.In conclusion, the SCI-3323-000 is an effective and highly efficient EMI/RFI filter. It is specifically designed for applications where EMI/RFI noise is a problem and is a great choice when fast and easy installation is desired or necessary. Despite its advantages, its limitations should be considered when selecting a filter for your specific application.

The specific data is subject to PDF, and the above content is for reference