SCI-9980-333

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI filters are components used in electrical systems and circuits, to protect them from ElectroMagnetic Interference (EMI) and Radio Frequency Interference (RFI). They are designed to prevent higher frequency noise produced by other components in the system from entering other parts of the circuit and interfering with normal operations. The range of frequencies that can be filtered depend on the type of filter. The most common filter type is the LC, or inductive-capacitive, network.

The SCI-9980-333 is an example of an LC (inductive-capacitive) filter. The principle behind an LC filter is the use of inductors and capacitors to form a resonant circuit, which will absorb and reject signals with frequencies that are in resonance with it. The SCI-9980-333 is designed to be used in high-frequency applications, such as mobile phone and data transmission systems. The filter can be used as an EMI and RFI filter between the transmitter and receiver of any radio frequency (RF) signal, to reduce interference between them.

The SCI-9980-333 filter has an operating frequency range of 0.8 to 5.5 GHz, as well as an insertion loss of 4.6 dB and a return loss of 10dB. The peak efficiency is also maintained at 99%. The filter also has a good RF shielding performance, with a shielding effectiveness of 65 dB. The filter is designed to be compact and can be easily integrated into any system, making it suitable for a variety of applications.

The SCI-9980-333 is also a low pass filter with a cutoff frequency of 5.2 GHz. This means that the filter will pass all signals with frequencies below 5.2 GHz and block all signals with frequencies above it. This makes it an ideal choice for applications where a large amount of out-of-band noise is present.

The filter is designed to be used in both analog and digital applications. The filter can be used in a wide range of applications, such as mobile phone and data transmission systems, base stations, radio frequency interference (RFI) and pulse modulated systems. The filter is also suitable for a variety of low-noise amplifiers (LNAs).

The SCI-9980-333 filter is designed to be used in both shielded and non-shielded applications. For shielded applications, it can be used to reduce EMI/RFI from the outside and inside of the device. For non-shielded applications, it can be used to reduce EMI/RFI from within the device. The filter is constructed with an E-field shielding, making it suitable for both high- and low-power applications.

Overall, the SCI-9980-333 is a low loss EMI/RFI filter which is designed for use in high-frequency applications. The filter has good blinding effectiveness and peak efficiency and is suitable for both shielded and non-shielded applications. It is an ideal choice for applications that require high-quality signal transmissions, such as mobile phone and data transmission systems.

The specific data is subject to PDF, and the above content is for reference