SCIF-9910-502

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Feed through capacitors are used to control energy and voltage signals in a variety of applications. The SCIF-9910-502 is a type of feed through capacitor specifically designed for high voltage applications. This article will discuss the application field and working principle of the SCIF-9910-502.

Application Field of SCIF-9910-502

The SCIF-9910-502 feed through capacitor is designed for high voltage applications, including electric power grids, transmission systems, and power machinery. It provides a low impedance path for high voltage signals, preventing their interference and suppressing electrical noise. The SCIF-9910-502 has a wide frequency range, from fewer than 1HZ to greater than 100 kHz, making it suitable for a variety of high voltage applications.

Working Principle of SCIF-9910-502

The SCIF-9910-502 feed through capacitor works by allowing an electric current to pass through two insulated plates or conductors. These plates are coated with a dielectric material, such as ceramic, film, or paper, which is used to increase the capacitance of the device. The ability of the capacitor to store an electric charge is known as capacitance.

The effect of a capacitor on a signal depends on the frequency of the signal. At low frequencies, the capacitor acts as an open circuit, allowing the signal to pass through unchanged. At higher frequencies, the capacitor behaves like a short circuit, reducing the signal strength and preventing the signal from reaching its intended destination. This frequency-dependent behavior, combined with its high voltage operation, makes the SCIF-9910-502 a versatile tool for voltage-level control.

Conclusion

The SCIF-9910-502 feed through capacitor is designed for high voltage applications, providing an effective way to control energy and voltage signals. It works by allowing an electric current to pass through two insulated plates coated with a dielectric material, which increases capacitance. This capacitance allows the capacitor to act as either an open or a short circuit, depending on the frequency of the signal. This makes the SCIF-9910-502 a useful tool for voltage-level control.

The specific data is subject to PDF, and the above content is for reference